DODGE FC-SCMED-30M piloted flange bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCMED
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE FC-SCMED-30M belongs to piloted flange bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FC-SCMED-30M and any equivalents.
The DODGE FC-SCMED is a piloted flange mounted bearing unit. It pairs an insert ball bearing with a flange housing that centers in the bore through a pilot, which helps maintain alignment and rigidity at the mounting point. This makes it suitable for supporting rotating shafts where the housing is fastened to a machined face, and it arrives as a sealed assembly ready for installation.
The code breaks down into clear sections. The FC prefix denotes the piloted flange design. SCMED identifies the insert bearing series, and the number that follows indicates the shaft diameter the insert is machined for. The trailing M marks a variant within the series. Reading the full code removes guesswork when you need to match a unit to your equipment.
You will find these units on belt conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate plants. The piloted flange allows mounting on sheet metal or cast iron with a centering fit, and it lets you dismount the assembly without dismantling the entire shaft. The housing also shields the insert in dusty or moderately humid conditions.
When selecting a unit, confirm the shaft diameter, the insert locking method (set screw or eccentric) and the sealing suited to the environment. The piloted flange must sit on a flat face perpendicular to the shaft; misalignment will reduce bearing life. The insert is lubricated at the factory. In service, inspect the seal and relubricate according to operating conditions.
Piloted flange units from different brands often share standardized mounting dimensions, but the insert locking system and sealing can differ. Compare the complete code and the flange dimensions before substituting one unit for another. If you are unsure, send us the code and we can point you to a compatible alternative.
To replace an FC-SCMED bracket, message us on WhatsApp with the exact code and we will quote it promptly. If the original code is no longer legible, we can also help identify the unit from the shaft and flange dimensions.
Dimensions
- Número de producto
- 076325
- Bore
- 30 mm
Frequently asked questions
- What does the code FC-SCMED-40M mean?
- FC stands for piloted flange, SCMED is the insert bearing series, and the number corresponds to the shaft diameter of that unit. The final M denotes the variant. With that complete code we can quote the exact unit.
- How do I choose between the different sizes in the series?
- The key data is the diameter of the shaft where the insert is mounted. That determines the flange and locking type. If you don't have the code, send us the shaft and flange dimensions by WhatsApp and we will indicate the option.
- Can it be replaced by a unit from another brand?
- In many cases yes, because piloted flanges follow standardized mounting dimensions. Still, compare the complete code, the shaft diameter and the insert locking system. Send us that data and we will indicate the compatible alternative.