DODGE FC-SCED-110L piloted flange bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCED
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE FC-SCED-110L belongs to piloted flange bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FC-SCED-110L and any equivalents.
The FC-SCED from DODGE is a piloted flange mounted unit that pairs an insert ball bearing with a cast iron housing. It supports rotating shafts where front mounting and alignment are required, as in conveyors, mixers, and process machinery. MR Industrial Accessories supplies this line and assists with choosing the correct variant based on shaft diameter and operating conditions.
Reading the part number FC-SCED-110L: FC stands for the piloted flange design, SCED is the insert bearing series, and 110 gives the shaft diameter in inches. The trailing L denotes a sealing or locking option within the series. For a quote, provide the full part number from the nameplate or equipment drawing.
Typical applications include belt conveyors, bucket elevators, mixers, mills, and process equipment in food, chemical, and materials plants. The piloted flange simplifies mounting on sheet metal and maintains concentricity with the shaft. The cast iron housing handles moderate radial and axial loads.
When selecting, consider shaft diameter, how the unit fastens to the frame, and environmental conditions. SCED series inserts are available with contact or labyrinth seals depending on contamination levels. Installation requires a flat mounting surface, tightening screws in a cross pattern, and checking shaft alignment to prevent stress. Factory lubrication can be replenished with general-purpose lithium grease.
DODGE SCED series housings are interchangeable with other piloted flange brands that share the same shaft diameter and hole pattern. For replacement, compare critical dimensions: shaft diameter, distance between fastening centers, and flange height. A compatible alternative with equivalent performance can be evaluated.
To request the FC-SCED housing for your equipment, send the part number or shaft dimensions via WhatsApp or email. MR also manufactures split plummer block housings and custom special parts for non-standard mountings.
Dimensions
- Bore
- 1-5/8 in
Frequently asked questions
- What does the part number FC-SCED-110L indicate?
- FC denotes piloted flange, SCED is the insert bearing series, and 110 is the shaft diameter in inches. The final L identifies a sealing or locking variant. Provide the complete part number to quote the exact reference.
- How can I tell if this housing will replace my current one?
- Check the shaft diameter, the distance between fastening holes, and the flange height. If these match, the housing is interchangeable. If unsure, send a photo or drawing via WhatsApp and we will suggest a compatible alternative.
- What lubrication does the insert bearing need?
- The SCED series is pre-lubricated. For replenishment, use general-purpose lithium grease suitable for the operating temperature. Avoid mixing different bases and follow the equipment maintenance schedule.