DODGE FB-SCFS-25M-SHFS flange bearing 4 holes

DODGE FB-SCFS-25M-SHFS belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FB-SCFS-25M-SHFS and any equivalents.

The DODGE SCFS is a mounted bearing unit that pairs a square flange housing with an insert ball bearing. Four bolts through the front face hold it to the structure, so the shaft is supported without a separate pillow block. The design keeps alignment simple and suits power transmission and conveying equipment where space is limited.

Reading the code helps you order with confidence. FB stands for the flange housing, SCFS names the 4-bolt flange series, and the digits that follow give the nominal shaft diameter in millimeters. The M suffix marks the mounting variant, while SHFS identifies the insert bearing inside the unit. A complete part number therefore describes a square flange bearing for a given shaft, fitted with an SHFS insert.

Typical duty includes belt and roller conveyors, mixers, agitators, blowers, centrifugal pumps and packaging lines. The 4-bolt pattern anchors easily to sheet metal or structural profiles, which is why these units also show up on irrigation equipment and farm machinery that needs sturdy, straightforward shaft support.

When selecting, confirm the shaft diameter first, then look at the load. A 4-bolt flange handles moderate radial and axial loads. The SHFS insert arrives pre-lubricated, with seals that hold grease in and keep dust out. Set the flange on a flat surface, tighten the four bolts in a cross pattern, and check that the shaft turns freely. Good alignment and routine relubrication keep the unit running.

Flange units with insert bearings can be swapped between makers when the flange dimensions, shaft diameter and insert mounting system line up. DODGE, SKF, NTN, Timken and FYH all offer comparable lines, yet hole spacing and locking style can differ. Compare the hole center distance and shaft diameter before substituting. Send the original part number and we will point you to a compatible option.