DODGE FB-PSEZ-100-P flange bearing 3 holes

DODGE FB-PSEZ-100-P belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FB-PSEZ-100-P and any equivalents.

A PSEZ 3-bolt flange bracket pairs a cast iron housing with an insert ball bearing, giving you a mounted unit that bolts to a flat surface. It supports and guides rotating shafts where the shaft runs perpendicular to the frame and front mounting keeps alignment simple. We supply this DODGE line to customers throughout the United States and Latin America.

Reading the code helps you order correctly. The letters mark the flange bracket family with insert bearing; the three digits that follow set the shaft size. Look at FB-PSEZ-012-P, FB-PSEZ-100-P, FB-PSEZ-103-P, FB-PSEZ-104-P and FB-PSEZ-107-P: only the numeric block changes with shaft diameter, and the trailing P identifies the mounting variant. The full part number is what governs the order.

You will find these units on belt conveyors, fans, mixers, centrifugal pumps and process lines in food, chemical, cement and aggregate operations. They suit installations where the shaft sits at a right angle to the structure and where lubricating or swapping the insert is awkward. Spreading the load across three bolts helps hold shaft position and damp vibration under moderate radial loads.

Selection starts with shaft diameter and load type. Where axial forces or misalignment are present, check the insert's internal clearance and sealing arrangement. The support surface must be clean and flat, and the three bolts should be drawn down evenly so the housing is not distorted. Relubricate the insert according to the duty cycle, keep the shaft aligned with the driven equipment, and specify the right protection when dust or moisture is in the air.

Flange brackets with insert bearings interchange between makers when shaft diameter, hole spacing and center height line up. A similar part number is not enough; housing dimensions and mounting style have to be compared. To replace an existing unit, send the number stamped on the part or the main dimensions, and we will point you to the compatible alternative in the DODGE line we carry.

Send your PSEZ flange bracket requirement by WhatsApp or email with the complete part number, such as FB-PSEZ-103-P, or with the shaft diameter and flange dimensions. Our team replies promptly and can also advise on the insert, sealing and lubrication so the mounting runs correctly from first start-up.