DODGE F4B-VSC-25M-NL flange bearing 4 holes

DODGE F4B-VSC-25M-NL belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-VSC-25M-NL and any equivalents.

The DODGE VSC series flange Y-bearing unit is a four-bolt mounted assembly that pairs a cast iron housing with an insert ball bearing, supplied already aligned and greased. It supports rotating shafts on equipment that calls for a solid front-face mounting and quick installation, and the insert can be swapped out without taking the surrounding structure apart. MR Industrial Accessories LLC supplies this unit to customers throughout the United States and in several Latin American countries.

Reading the VSC code takes a moment and pays off at the counter. In a reference such as F4B-VSC-20M-NL, the F marks the flange housing style, the 4 tells you how many mounting holes the flange carries, and the B denotes the mounting variant. VSC identifies the housing and insert series, M shows how the bearing locks onto the shaft, and NL means the insert ships without a relubrication point, greased for its full service life. The figure in the middle, whether 20, 25 or 40, points to the shaft size in the series table.

You will find these units on belt conveyors, mixers, bucket elevators, blowers, centrifugal pumps and packaging lines. Plants that run them include food processing, cement, tanneries, cold storage and agro-industrial operations, where damp or dusty conditions call for a sturdy housing and dependable sealing. Because the flange takes four bolts, it mounts on sheet metal or profile frames with straightforward front alignment, and the whole assembly can come off without disturbing the shaft.

Selection starts with the shaft diameter your equipment uses, then moves to the bolt hole spacing and flange diameter to confirm the fit against your structure. VSC units come with inserts locked either by set screws or by an eccentric collar, and the choice depends on the load and the direction of rotation. When mounting, seat the flange flat, tighten the bolts in a cross pattern and verify shaft alignment with a straightedge or dial indicator. Lifetime lubrication on NL versions and the insert seal keep maintenance simple in spots that are hard to reach.

Mounted units interchange between manufacturers by shaft size and housing type rather than by full code. A four-bolt flange unit from another brand in the same shaft size may work, but compare bolt hole spacing, flange diameter and the insert locking method before committing. If only the insert is worn, replacing the bearing and keeping the housing is often the better route. Send the code stamped on the part, or simply the shaft size, by WhatsApp or email and the team will quote the unit, suggest equivalents and help you choose.