DODGE F4B-VSC-200L flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- VSC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-VSC-200L belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-VSC-200L and any equivalents.
The DODGE VSC series Y-bearing flange unit combines an insert ball bearing with a cast iron housing in a 4-bolt flange mounted assembly. It supports rotating shafts where firm frontal fixing and simple alignment are required. MR Industrial Accessories supplies this line to plants and workshops across the United States and several Latin American countries.
The VSC code breaks down into blocks: the letter F stands for flange, the following number gives the shaft diameter, B indicates the housing type, VSC identifies the series, and the L suffix covers the insert configuration and locking method. For instance, F4B-VSC-200L is a 4-bolt flange housing for a 2 inch shaft. Use this complete code when ordering the exact part.
Typical applications include belt conveyors, mixers, blowers, centrifugal pumps, and packaging lines. In food plants, meatpacking facilities, tanneries, and mills, frequent washdowns call for housings and seals that resist moisture. The 4-bolt flange mounts directly onto sheet metal or structure without machining the support.
When selecting, confirm the shaft diameter, the insert locking type (set screw or eccentric), and the sealing arrangement: single or double lip seals determine whether the housing handles dust, water, or hose cleaning. During installation, seat the flange flat, tighten bolts in a cross pattern, and check that the shaft turns freely. Apply lithium grease according to the duty cycle and verify alignment with a straightedge or dial indicator.
Mounted housings from different brands can interchange by shaft number and flange type, but hole diameter, center distance, and locking system may vary. Compare drawing against drawing before replacing. An equivalent housing from another line can be adapted if mounting dimensions and load capacity match.
For a flange Y-bearing unit for your equipment, send the complete code on WhatsApp to MR Industrial Accessories. We will quote the DODGE reference or suggest a compatible alternative with the same mounting dimensions. We also advise on sealing, lubrication, and replacement to keep the assembly running smoothly in your application.
Dimensions
- Número de producto
- 123652
Frequently asked questions
- What does VSC mean in DODGE housings?
- VSC identifies the series of flange mounted housings with an insert bearing. In the code, F means flange, the number is the shaft diameter, and the L suffix indicates the insert configuration. The full code identifies the part unambiguously.
- How can I tell if a flange housing will replace the one I have?
- Check the shaft diameter, the number and spacing of flange holes, and the insert locking type. If those match, the housing is interchangeable. Send us the dimensions or the old code on WhatsApp and we will confirm.
- What lubrication does a housing with insert bearing need?
- Use general-purpose lithium grease. Frequency depends on speed, load, and environment; increase it where water or dust is present. The insert usually has a grease channel; apply grease until it exits clean through the seals.