DODGE F4B-SCMAH-40M flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCMAH
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-SCMAH-40M belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-SCMAH-40M and any equivalents.
The DODGE SCMAH series is a mounted bearing unit that pairs a cast iron housing with an insert ball bearing. It mounts to a flat surface using four bolts, providing rigid and centered shaft support. Typical uses include belt conveyors, mixers, fans, and other process equipment. MR Industrial Accessories supplies this line and can help you identify the correct variant for your application.
The part number breaks down into meaningful segments. The letter F denotes the 4-bolt flange configuration. The following digit gives the housing size. SCMAH identifies the housing and insert bearing series, with design details specific to DODGE. In examples like F4B-SCMAH-25M, F4B-SCMAH-30M, and F4B-SCMAH-40M, the final number—25, 30, or 40—specifies the shaft diameter in millimeters. This structure makes it straightforward to pinpoint the flange type, series, and shaft size at a glance.
These units appear in food processing, chemical, cement, and aggregate operations, as well as in belt conveyors, bucket elevators, agitators, blowers, and packaging lines. The four-bolt flange simplifies mounting onto steel frames or masonry, while the insert bearing's self-aligning design compensates for minor misalignment. MR Industrial Accessories provides these bearings for both replacement and new installations.
When selecting a bearing, consider shaft diameter, radial and axial loads, and the operating environment. The insert seal offers protection against dust and moisture; for frequent washdowns, verify the seal type. Installation calls for a flat, clean surface, and flange bolts should be tightened in a cross pattern to avoid distortion. Adequate lubrication and careful alignment contribute to bearing life. In vibrating equipment, additional fastening may be needed.
DODGE SCMAH series bearings can be interchanged with other brands that offer 4-bolt flanges and insert bearings of matching dimensions. The critical factors are shaft diameter, flange hole spacing, and overall unit height. Substituting a bearing from another source often requires base modifications, so dimension checks are recommended before replacement. MR Industrial Accessories can guide you to a compatible alternative that maintains performance.
To request a quote for an SCMAH flange bearing, send the complete part number via WhatsApp or email. The team will confirm the exact reference or suggest an equivalent that suits your equipment. Replies are prompt to help keep your line running.
Dimensions
- Bore
- 40 mm
Frequently asked questions
- What does the part number F4B-SCMAH-30M indicate?
- The F stands for a 4-bolt flange; the 4 is the housing size; SCMAH is the series of the housing and insert bearing; and 30M is the shaft diameter in millimeters. Each segment identifies a specific feature of the unit.
- How do I select the right bearing for my shaft?
- Measure the shaft diameter and review the loads and operating conditions. Then compare the flange dimensions—hole spacing and height—with the available space. With that information, we can advise you on the appropriate variant.
- Can they be interchanged with bearings from other brands?
- They can if the shaft diameter, distance between flange holes, and overall height match. We help you compare the critical dimensions to find an alternative compatible with your equipment.