DODGE F4B-SCM-211-NL flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-SCM-211-NL belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-SCM-211-NL and any equivalents.
A 4-bolt flange mounted bearing unit from the DODGE SC series, supplied with an insert bearing. It holds a rotating shaft against a flat surface, takes moderate radial and axial loads, and suits power transmission setups that call for a rigid, well-aligned support. Mounting is straightforward, and the seal keeps lubricant in while keeping dust out.
Reading the code helps you order the right replacement. F4B tells you it is the 4-bolt flange version, SC points to the insert bearing series, and the three digits give the shaft diameter in inches. A suffix of NL means the unit comes without a locking collar; the M in SCM identifies an insert with particular series characteristics. With those blocks clear, there is no doubt about which reference to ask for.
These units turn up in belt conveyors, mixers, mills, centrifugal pumps, fans and packaging lines. Because the housing bolts through four flange holes, it installs easily on sheet metal or profile structures, and the insert bearing tolerates the small misalignments that come with long shafts. Food, chemical and aggregate plants often rely on them where a sturdy support and simple upkeep are what matter.
Choosing comes down to three things: shaft diameter, mounting style (flange or pillow block) and the conditions on site. The insert seal determines how well the unit handles dust and moisture, so a reinforced seal is worth considering in dirty areas. Fit the unit on a clean seat, line up the holes, then tighten the bolts in a cross pattern. Use the lubricant specified by the manufacturer, and note that internal clearance is not adjusted on this type of unit.
SC series units can stand in for other brands when the flange standard and shaft diameter are the same, provided hole spacing and center height also line up. For a quote, give the complete part number along with the shaft and flange dimensions, and a compatible option can be suggested. If you are unsure about a suffix or a diameter, the code can be interpreted for you.
To replace a Y-bearing unit with insert bearing, send the part number to MR Industrial Accessories by WhatsApp or email. The team replies promptly, can point you to the DODGE reference that fits your equipment, and can help you read the designation when the suffix or diameter is unclear.
Dimensions
- Número de producto
- 052205
- Bore
- 2-11/16 in
Frequently asked questions
- What does the NL suffix mean on DODGE SC series bearing units?
- It marks the version supplied without a locking collar. That makes mounting simpler and cuts down on parts, though the shaft fit is then achieved by interference or set screws, depending on the insert design.
- How do I work out the right shaft diameter?
- The three-digit number in the code gives it: each figure corresponds to a shaft size in inches. Measure your shaft with a caliper and check it against the SC series table.
- Can a bearing unit from another brand be replaced with a DODGE SC series unit?
- It can, as long as the shaft diameter, flange hole spacing and center height all match. Send the dimensions or the original part number by WhatsApp or email and the equivalent can be confirmed.