DODGE F4B-SCFS-50M-SHFS flange bearing 4 holes

DODGE F4B-SCFS-50M-SHFS belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-SCFS-50M-SHFS and any equivalents.

The DODGE SCFS series is a four-bolt flange mounted Y-bearing unit built around an insert bearing. It holds a rotating shaft against a flat surface, with the flange sitting perpendicular to the shaft so the load spreads across a symmetrical bolt pattern on sheet metal or a frame. It suits equipment where the shaft needs axial location and where the insert itself takes care of alignment.

Reading the code helps you order the right unit. The F4B prefix tells you the housing is a four-bolt flange. SCFS names the housing family together with the insert type. The number in the middle, as in F4B-SCFS-20M-SHFS or F4B-SCFS-50M-SHFS, is the shaft diameter the unit is assembled for. The M suffix and the SHFS ending mark sealing and insert fastening variants. Those blocks together identify the complete unit.

You will find these units on material handling equipment, belts, elevators, mixers, blowers and process lines, where the shaft runs supported by sheet metal or profile structures. A four-bolt flange makes flat-face mounting straightforward and lets you pull the unit without taking the whole shaft apart.

Selection comes down to three things: shaft diameter, the type of load, and the direction of force acting on the flange. Match the insert sealing to the environment, since dust, water or frequent washdown call for different protection. When mounting, rest the flange on a clean, flat surface, tighten the four bolts in a cross pattern, and confirm the shaft turns freely. Lubricate the insert according to the duty cycle and check alignment before startup.

Flange mounted units from different brands interchange by shaft diameter and hole spacing, not by commercial code. Two references can share flange dimensions and still be equivalent, yet differ in sealing, internal clearance or shaft fastening. For a replacement, send the full code plus the flange dimensions and we will point you to the compatible option.

Have the unit code, the shaft diameter or a photo of the flange? Send it to MR Industrial Accessories by WhatsApp or email. We will quote the DODGE SCFS series reference you need and, if you want another variant in the line, suggest the one that fits your equipment.