DODGE F4B-SCED-103 flange bearing 4 holes

DODGE F4B-SCED-103 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-SCED-103 and any equivalents.

The DODGE SCED series is a 4-bolt flange mounted Y-bearing unit. It fastens a rotating shaft to a flat surface and handles moderate radial and axial loads. You will find it on conveyors, agitators, blowers and other process equipment where the shaft needs solid support and straightforward alignment.

The code breaks down into blocks. The first letter, F, tells you it is a flange housing. The number after it gives the count of mounting holes. B refers to the housing body, and SCED identifies the insert series and its seal arrangement. The trailing digits indicate shaft size; three-digit groups cover the most common diameters. With the complete code, there is no doubt about which unit you need.

Typical installations include food and beverage, water treatment, cement, mining and material handling. You will see these units on belt conveyors, bucket elevators, mixers, centrifugal fans and packaging lines. The 4-bolt flange mounts to sheet metal or structural profiles with the shaft perpendicular to the support. It is a practical choice when you want a rigid support and repeatable mounting across a series.

Begin selection with the shaft diameter and the load type: mostly radial or combined. Then match the insert sealing to the environment—dust, moisture or washdown—and pick the right seal. On installation, set the flange on a clean, flat surface, tighten the four bolts in a cross pattern, and verify shaft alignment before rotating. Lubricate the insert according to the duty cycle and check clearance and seal condition at regular intervals.

Interchangeability among Y-bearing unit brands depends on shaft size, housing type and bolt hole spacing. Two 4-bolt flange units can serve the same purpose even when insert suffixes or sealing systems differ. That is why it pays to compare the full designation, not just the diameter. If your equipment carries another brand, send us the original code and we will point you to the compatible option in the DODGE line.

MR Industrial Accessories supplies the DODGE line. Whether you are replacing a flange Y-bearing unit or building new equipment, send the full code—for example F4B-SCED-013—or the shaft size and number of holes by WhatsApp or email. We reply promptly and can suggest equivalents and help you choose the right variant.