DODGE F4B-SCED-010L flange bearing 4 holes

DODGE F4B-SCED-010L belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-SCED-010L and any equivalents.

The DODGE SCED series Y-bearing is a flange-mounted unit that uses an insert bearing to support and guide rotating shafts. Four bolts secure the flange to the frame or structure, spreading the load and keeping the shaft aligned. This makes it a straightforward mounting option for equipment that needs dependable, easily replaceable support. MR Industrial Accessories supplies this series to customers throughout the United States and in several Latin American countries.

Reading the SCED code is straightforward once you know the pattern. The letters at the start tell you the housing and insert type. The digits that follow express the shaft diameter in inches using a three-digit format, which corresponds to sizes such as 1/2", 5/8" or 1". The suffix L points to a housing variant, which may involve the seal design or the flange layout. Examples like F4B-SCED-008L, F4B-SCED-010L and F4B-SCED-110L show how the numeric portion shifts with each diameter. For a correct selection, have the shaft diameter and the complete code from the nameplate or equipment drawing on hand.

These flange units appear in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps, fans and machinery used in the food, chemical and process industries. They also show up in material handling equipment, such as aggregate or grain conveyor belts, and in packaging lines. The four-bolt flange can be mounted on folded sheet metal, steel profiles or cast iron, and the insert bearing tolerates minor misalignment without losing function. In plants where spare parts planning matters, the SCED series is a common choice because of its standardized format.

When selecting the right unit, consider the shaft diameter, the load type (radial, axial or combined) and the operating environment. The insert seal determines the level of protection against dust, water or particles; for humid areas or frequent washdowns, a reinforced seal is advisable. Lubrication may be permanent or require periodic greasing depending on the version, so check the grease type and the interval recommended by the manufacturer. During installation, make sure the flange sits flat on the surface and that the four bolts are tightened evenly to prevent distortion. Aligning the shaft with the unit is essential so the insert does not work under lateral stress.

SCED series Y-bearings can be interchanged with equivalent products from other brands that share the same mounting standard and shaft diameter. Interchangeability depends on the flange dimensions, hole spacing, shaft diameter and insert locking type. A similar code alone is not enough: you must compare the shaft center height, the flange outer diameter and the locking system. MR Industrial Accessories can suggest a compatible alternative or, if needed, quote a custom solution.

To request a quote, send the full code from the equipment or old spare part via WhatsApp or email, for example F4B-SCED-008L, F4B-SCED-010L or F4B-SCED-110L. If the code is not available, provide the shaft diameter, a photo of the unit and the flange dimensions. The team replies promptly with the quote and the technical information you need, and can also help you choose the right unit.