DODGE F4B-SC-008L-NL flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-SC-008L-NL belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-SC-008L-NL and any equivalents.
DODGE SC 4-bolt flange bearing units combine a cast iron housing with a pre-lubricated, sealed insert ball bearing. They support rotating shafts on flat surfaces where secure mounting and straightforward alignment are needed. The SC series is widely used in conveying and power transmission equipment.
The code is structured in blocks: the first letters and number indicate the housing type and number of bolt holes, the number after the hyphen gives the shaft size, the L suffix defines the seal type, and NL means the insert has no locking collar. For example, F4B-SC-008L-NL, F4B-SC-010L-NL and F4B-SC-110L-NL are three sizes in the same family. To select, focus on shaft diameter and the mounting style your machine accepts.
These units are common in belt conveyors, bucket elevators, mixers, screens, mills and packaging lines. The 4-bolt flange mounts on sheet metal or profile structures with the shaft perpendicular to the support plane. They handle moderate speeds and combined radial and axial loads. The L seal guards against dust and splashes; in very dirty or washdown conditions, consider additional protection. The insert is factory-lubricated and generally needs no maintenance until replacement.
During installation, rest the flange on a flat surface, tighten bolts in a cross pattern, and check shaft alignment with the other support to avoid parasitic loads. Verify shaft diameter, flange hole spacing and housing orientation before ordering.
DODGE is a reference brand in mounted housings, and its sizes often interchange with other brands under equivalent standards. Interchangeability depends on shaft diameter, fixing type and flange dimensions, not just a similar code. If replacing an existing unit, send the complete code or the shaft and flange dimensions. MR Industrial Accessories will quote the DODGE reference or suggest a compatible alternative.
MR Industrial Accessories supplies DODGE. If you are unsure which size fits your equipment, message us on WhatsApp with the code F4B-SC-008L-NL, F4B-SC-010L-NL, F4B-SC-110L-NL or the one on your machine. We will reply promptly with a quote and the technical information you need for correct mounting.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- How do I determine the correct SC housing size?
- Start with the shaft diameter where the insert mounts, then check the flange hole spacing and housing orientation. If you don't have the code, send those measurements via WhatsApp and we'll help identify the reference.
- What do the L and NL suffixes mean?
- L indicates the insert seal type, designed to retain lubricant and block contaminants. NL means the bearing has no locking collar. These are construction variants within the SC series.
- Can I replace a housing from another brand with a DODGE one?
- Often yes, because shaft and flange dimensions follow equivalent standards. Interchangeability requires comparing diameter, fixing and flange dimensions, not just the code. Send us the data and we'll confirm the equivalence.