DODGE F4B-GTMAH-35M flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- GTMAH
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-GTMAH-35M belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-GTMAH-35M and any equivalents.
A DODGE GTMAH Y-bearing insert unit is a flange-mounted bearing that bolts down to a flat surface and carries a rotating shaft. Its four-bolt flange and self-aligning insert suit compact equipment such as conveyors, mixers, fans and farm machinery. MR Industrial Accessories supplies this DODGE line to customers in the United States and Latin America, and helps match the unit to your shaft and working conditions.
You can decode the reference before you order. In codes like F4B-GTMAH-25M or F4B-GTMAH-40M, the F and B stand for the flange and the housing body, GTMAH names the insert bearing family with its sealing and locking design, and the closing number gives the shaft diameter in millimeters. The M confirms metric sizing. Once you read the code this way, you can send the exact reference for a quote.
Typical installations include food, beverage, cement, mining and aggregate plants, plus seeders, combine harvesters and grain conveyors. Packaging lines, blowers, exhausters and material handling equipment also use them. Bolting to sheet metal or a steel structure is straightforward, and the self-aligning insert absorbs minor shaft misalignment, which keeps maintenance simple and limits downtime.
Selection starts with shaft diameter and load type: radial, axial or combined. Review the sealing as well, since dusty, wet or washdown-heavy areas call for tighter protection. When mounting, place the flange on a clean, flat surface, tighten bolts in a cross pattern, and confirm shaft alignment before start-up. Regular lubrication and periodic re-tightening of the insert set screws help the assembly last.
DODGE is a well-known name in mounted bearings, and its series often have counterparts from other manufacturers. Compare shaft diameter, flange style, hole count and insert locking method before substituting. Not every series swaps piece by piece, though many share mounting dimensions. MR Industrial Accessories can point you to a compatible alternative when you need one.
If you already have the code for your DODGE Y-bearing insert unit, send it by WhatsApp or email for a prompt quote. If the code is missing, share the shaft size and operating conditions and we will help identify the model. We support selection, mounting and replacement of these components.
Dimensions
- Bore
- 35 mm
Frequently asked questions
- How do I determine the right GTMAH unit size?
- Measure the shaft diameter at the mounting point. The last number in the code, such as 25M or 40M, is that diameter in millimeters. If the shaft shows wear, verify with a caliper. Send us the measurement and we will quote the correct unit.
- Will this unit handle dusty or damp conditions?
- The GTMAH series uses sealing built for demanding industrial settings. Where fine dust, water or frequent washdowns are present, review the seal type and consider extra protection. Tell us about your equipment conditions and we will advise.
- Can a DODGE unit replace one from another brand?
- Often it can, provided the shaft diameter, hole spacing and flange type line up. Dimensions differ between brands. Send the code of the original unit and we will identify the equivalent we can supply.