DODGE F4B-GTEZ-08-PCR flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- ER-Series
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-GTEZ-08-PCR belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-GTEZ-08-PCR and any equivalents.
The DODGE ER-Series 4-bolt flange Y-bearing housing is a mounted unit that pairs a cast iron housing with an insert ball bearing. It arrives factory-aligned and pre-lubricated, ready to support rotating shafts where a flat, rigid mounting surface is available. The design allows the unit to be installed or removed without dismantling the surrounding machine.
Part numbers in this line follow a structured format. The letter F denotes a 4-bolt flange configuration, and the digit immediately after indicates the housing size. GTEZ identifies both the housing family and the insert it accepts, while PCR specifies the bearing seal type. This is why F4B-GTEZ-04-PCR, F4B-GTEZ-05-PCR and F4B-GTEZ-06-PCR share the same layout but differ in shaft diameter: a higher number corresponds to a larger size. The suffixes are functional, not cosmetic—they determine the sealing arrangement and internal clearance of the assembled unit.
In industrial settings, these housings are commonly found on belt conveyors, packaging lines, mixers, screens, extractors and process equipment in food, chemical and aggregate plants. The 4-bolt flange mounts onto sheet metal or a flat structure, with the shaft either passing through or positioned at the end. Because they are mounted units, maintenance is straightforward: the complete assembly is swapped out and returned to service without re-machining the seat.
Selection depends on shaft diameter, the radial and axial loads of the application, and the operating environment. In dusty or wet areas, the PCR sealing is recommended because it shields the raceway and keeps lubricant in place. Verify flange alignment before tightening the bolts, and grease according to the duty cycle. Forced or misaligned mounting will shorten insert life more than any other factor.
Mounted units can be interchanged between brands by shaft number and housing type, not by the full part number. If the equipment uses another brand, compare shaft diameter, bolt hole spacing and center height; those three dimensions define the equivalent. We can suggest a compatible alternative and, if needed, quote a custom solution. Send the part number or model via WhatsApp and we will respond promptly.
Dimensions
- Número de producto
- 129545
Frequently asked questions
- What does the designation F4B-GTEZ-04-PCR mean?
- The F indicates a 4-bolt flange; the following number is the housing size; GTEZ denotes the housing and insert family; and PCR refers to the sealing type. The final number defines the shaft diameter, so F4B-GTEZ-04-PCR and F4B-GTEZ-05-PCR share the same format but fit different shafts.
- How do I request an equivalent to another brand?
- Send us the shaft diameter, the bolt hole spacing of the flange and the center height of the shaft via WhatsApp. With those three dimensions we will identify a compatible alternative from the DODGE ER-Series line or propose a custom-manufactured option.
- Can the insert bearing be greased?
- Yes, the insert has a grease point and should be lubricated based on operating hours and the environment. In dusty or humid areas, the PCR sealing helps retain lubricant and keep the raceway clean between service intervals.