DODGE F4B-GTAH-50M flange bearing 4 holes

DODGE F4B-GTAH-50M belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-GTAH-50M and any equivalents.

This mounted assembly from the DODGE GTAH series pairs a cast iron housing with an insert ball bearing. Four bolts secure it to a flat surface, holding and guiding rotating shafts where rigid mounting and accurate alignment are required.

The part number tells you the size. In codes such as F4B-GTAH-17M or F4B-GTAH-40M, the F4B prefix means a 4-bolt flange bracket, GTAH identifies the housing family with insert bearing, and the number before the M gives the shaft diameter the insert is bored for. Sizes run from F4B-GTAH-17M through F4B-GTAH-50M. The shaft diameter is the first thing to confirm when ordering.

Typical installations include belt conveyors, bucket elevators, mixers, blowers, centrifugal pumps and process equipment in food, chemical and aggregate plants. The four-bolt flange mounts firmly to sheet metal or cast structures, and the shaft position can be adjusted before the bolts are tightened. This makes the bracket a practical choice for robust, low-maintenance support in areas with moderate dust or moisture.

Selection depends on shaft diameter, mounting style and operating conditions. GTAH inserts generally include sealing that keeps lubricant in and contaminants out. For frequent washdowns or heavy dirt, check the seal type. During installation, set the flange on a clean, flat surface, tighten bolts in a cross pattern and check alignment with the opposite support. The bearing is pre-lubricated and clearance is set at the factory, but confirm the insert turns freely before start-up.

When replacing a bracket, remember that manufacturers use different nomenclatures for equivalent shaft sizes. A DODGE GTAH unit may interchange with other 4-bolt flange lines, but compare shaft diameter, hole spacing and center height first. If no exact equivalent is listed, send the original part number or bracket dimensions through WhatsApp and we will identify a compatible option.

MR Industrial Accessories LLC supplies the DODGE line and can help you choose the right bracket. Send the part number from the equipment or the shaft and flange dimensions by WhatsApp, and we will quote promptly.