DODGE F4B-GT-010 flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- Grip Tight
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-GT-010 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-GT-010 and any equivalents.
The DODGE GT series 4-bolt flange Y-bearing unit is a mounted bearing that supports rotating shafts on flat surfaces. It combines a flange housing with an insert bearing, handling moderate radial and axial loads. The four-bolt design simplifies anchoring and alignment, making it a practical choice for many industrial applications.
The part number tells you what you are holding. In codes like F4B-GT-03, F4B-GT-04, and F4B-GT-08, the F stands for flange housing, the following number is the housing size, and GT indicates the Grip Tight locking system that secures the insert to the shaft. A three-digit code such as F4B-GT-008 uses a leading zero to order the size within the series. The mounting principle stays the same across sizes; only the housing and insert dimensions change.
You will find these units on belt conveyors, packaging lines, mixers, blowers, centrifugal pumps, screens, and milling equipment. They are common in food processing, meat plants, cement operations, tanneries, and metalworking shops where dust, humidity, or washdowns are present. The 4-bolt flange mounts to sheet metal or structural profiles, and the insert accommodates minor misalignment without requiring complex machining.
Selection starts with the shaft diameter and the load the support will carry. Then consider the sealing: a simple contact seal differs from one with an additional lip for wet or particle-laden environments. During installation, place the flange on a clean, flat surface, tighten bolts in a cross pattern, and confirm the shaft aligns with the adjacent support. Replenish insert lubrication according to the duty cycle, and turn the shaft by hand before startup.
Interchangeability between brands of 4-bolt flange housings with insert bearings depends on shaft size, bolt hole spacing, and center height, not on the commercial code. To replace a DODGE GT series unit, provide the old code and the shaft and housing dimensions. We can also review sealing or locking variants to match your working environment.
Send your housing code, shaft diameter, and a photo of the mounting via WhatsApp or email. Our team replies promptly with a quote for the DODGE GT series reference and, when needed, suggests an equivalent to get your equipment back in service.
Dimensions
- Número de producto
- 129638
- Bore
- 5/8 in
Frequently asked questions
- What does GT mean in DODGE GT series housings?
- GT identifies the Grip Tight family, the system that secures the insert bearing to the shaft. This locking principle is consistent across all sizes in the series; only the housing and insert dimensions vary.
- How do I select the right flange housing for my shaft?
- Measure the shaft diameter, the flange bolt hole spacing, and the center height. With those three dimensions and details about the working environment, we can determine the appropriate sealing and quote the correct reference.
- Can I replace a housing from another brand with a DODGE one?
- Yes, interchangeability is based on shaft size, bolt hole spacing, and center height, not the commercial code. Send us the old code and mounting dimensions, and we will indicate a compatible alternative from the line we supply.