DODGE F4B-DLM-115 flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- D-Lok
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-DLM-115 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-DLM-115 and any equivalents.
The DODGE D-Lok series is a four-bolt flange mounted unit that pairs a cast iron housing with an insert ball bearing locked by an eccentric collar. Bolted flat against the machine frame, it holds a rotating shaft perpendicular to that surface, which makes it a practical choice where space is tight and alignment has to be simple.
Reading the part number is the fastest way to confirm what you are looking at. Take F4B-DLM-100: F stands for flange, 4 for the number of bolt holes, B for the housing style, and DLM for the D-Lok series with its particular sealing and locking arrangement. The trailing digits give the shaft size, so F4B-DLM-103, F4B-DLM-107, F4B-DLM-108, F4B-DLM-111, F4B-DLM-112 and F4B-DLM-115 are separate shaft fits, while F4B-DLM-200 belongs to the larger diameter range. That suffix never describes the flange itself.
Typical duty covers belt conveyors, bucket elevators, mixers, blowers and packaging lines, as well as pumps and ventilation equipment that need firm support in a low profile. Dusty and humid plants, including food, cement, paper and aggregate operations, are common environments for this type of unit. Because the shaft sits at a right angle to the mounting face, the housing can be fastened to sheet metal or structural profiles without extra brackets.
Selection comes down to two checks: the shaft diameter the equipment takes, and the mounting pattern it accepts. Locking works through an eccentric collar plus a set screw, which keeps installation and removal straightforward. The D-Lok design also includes a labyrinth and a radial shaft seal, so grease stays in and contaminants stay out. When fitting, line the flange up with the shaft axis and tighten the bolts diagonally in a cross pattern. Relubricate with standard bearing grease at the interval your machine builder specifies.
Mounted insert units from different manufacturers can often be swapped when shaft size, hole spacing and locking method line up. Eccentric collar ranges tend to share flange dimensions across brands, though sealing design and load ratings are not always the same. Before ordering a replacement, compare the full part number and the flange measurements. We can point you to a compatible reference among the brands we carry.
To get a quote on the DODGE D-Lok unit you need, send the complete part number by WhatsApp or email. If it is not handy, share the shaft diameter and a photo of the flange and we will help you identify it.
Dimensions
- Número de producto
- 128849
- Bore
- 1-15/16 in
Frequently asked questions
- What does the D-Lok designation tell me?
- It identifies the locking method: an eccentric collar with a set screw that grips the insert bearing onto the shaft. That gives a firm hold while keeping mounting and dismounting simple.
- How do I find the right shaft size?
- The last digits of the part number carry that information. Match them against your shaft, then confirm the flange hole spacing. If anything is unclear, send us the full number or the dimensions and we will help.
- Is a cross-brand replacement possible?
- Often yes, provided shaft diameter, hole spacing and locking type are the same. Flange dimensions are frequently shared between brands, but sealing and load capacity can differ. Ask us about a compatible option.