DODGE F4B-DL-60M-NL flange bearing 4 holes

DODGE F4B-DL-60M-NL belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-DL-60M-NL and any equivalents.

This DODGE mounted unit pairs an insert ball bearing with a four-bolt flange bracket. The flange bolts to a surface that sits perpendicular to the shaft, so it is a common choice for machine walls, frames and similar structures. The D-Lok series is recognized for its shaft locking method, which makes assembly and disassembly straightforward on the plant floor.

Reading a D-Lok code is straightforward once you know the blocks. In this series, F4B stands for the 4-bolt flange, DL identifies the D-Lok line, the middle number gives the nominal shaft diameter in millimeters, and NL means the insert is supplied without additional lifetime lubrication. Every code in the series follows the same pattern, so the middle number is always the shaft size. That consistency lets you order the bracket by code without second-guessing.

These brackets are used on belt conveyors, mixers, blowers, centrifugal pumps and process equipment. They also appear in food, chemical and aggregate processing plants, where the four-bolt flange simplifies anchoring to metal structures. Because the unit uses an insert bearing, it tolerates minor misalignment and combined loads, which suits drive shafts that run under demanding conditions.

When selecting a bracket, confirm the shaft diameter and the locking method your equipment requires. The D-Lok series locks without set screws on the shaft, reducing the chance of surface damage. During installation, check that the flange sits flat and tighten the anchor bolts evenly. Lubricate the insert according to the manufacturer's recommendations for the application and environment.

DODGE brackets can be interchanged with other brands of 4-bolt flange mounted bearings when the flange dimensions, shaft diameter and locking system match. For a quote, send the full code or the critical dimensions and the team can suggest a compatible alternative. Always verify tolerances and load capacity before replacing a component.

To request a quote for a flange bracket with insert bearing, message the part number or model on WhatsApp or by email. The team replies promptly and can point you to a compatible option if needed, as well as advise on assembly and lubrication for your application.