DODGE F4B-DL-110L-NL flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- D-Lok
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-DL-110L-NL belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-DL-110L-NL and any equivalents.
This Y-bearing bracket uses a DODGE D-Lok series insert and mounts through a 4-bolt flange. It holds rotating shafts to flat surfaces, carrying radial loads and some axial thrust. Installation is direct, and alignment is straightforward.
The D-Lok series code breaks down into blocks. The first part tells you the bracket type: a 4-bolt flange. The DL block identifies the D-Lok series and its locking system. The central number, such as 110, indicates the shaft diameter according to the series table. Suffixes L and NL cover configuration and sealing variants. Always provide the complete designation exactly as it appears on the equipment.
You will find these brackets on conveyors, mixers, fans, pumps and process lines. In food, chemical, cement and agricultural plants, the flange mounting solves fastening onto sheet metal or angle iron. The 4-bolt pattern spreads the load and lets you adjust shaft position before final tightening. It is a common choice when the bracket sits on a flat face and the shaft runs perpendicular to it.
Selection depends on shaft diameter, load type and operating environment. The insert seal determines protection against dust, water or washdowns. Lubrication and internal clearance affect service life. During mounting, make sure the flange seats without deforming and the shaft enters without impacts. Align brackets to avoid parasitic loads. Under vibration, check flange bolt tightness periodically.
Flange mounted bearings come in different brands with equivalent locking systems. Interchangeability is not automatic: insert tolerances, seal type and hole pattern vary. Compare the complete designation and critical dimensions before replacing. Look for a compatible alternative within the same family. We can point you to the option that fits your equipment.
To request a quote for a Y-bearing bracket with DODGE D-Lok series insert, send the part number via WhatsApp. With the full designation or a photo of the part, we will reply promptly. We can also advise you on a different sealing or locking variant within the line.
Dimensions
- Bore
- 1-5/8 in
Frequently asked questions
- How do I order the correct DODGE D-Lok series bracket?
- Send the complete part number from the equipment, for example F4B-DL-110L-NL. That lets us identify the flange, shaft diameter and sealing variant. If you do not have the part number, send a photo and the main dimensions via WhatsApp.
- What does the D-Lok designation mean in this bracket?
- D-Lok is the series name for these 4-bolt flange mounted bearings. The insert has a shaft locking system specific to this line. In the part number, the DL block identifies that series.
- Can it be replaced by another brand of flange bracket?
- Yes, if the flange dimensions, shaft diameter and locking type match. A similar part number is not enough; you must compare dimensions and sealing. We can tell you the compatible alternative for your equipment.