DODGE F3B-SLX-104S flange bearing 3 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SLX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F3B-SLX-104S belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F3B-SLX-104S and any equivalents.
The DODGE SLX series Y-bearing insert unit pairs an insert bearing with a cast housing in a 3-bolt flange configuration. It supports rotating shafts where mounting must be firm and alignment straightforward. MR Industrial Accessories LLC supplies this line and helps you match the right setup to your equipment.
Reading the SLX code is a quick way to confirm what you need. The first letter tells you the mounting style, the middle number gives the shaft size, and the trailing S marks the sealing variant. Take F3B-SLX-104S: a 3-bolt flange housing built for a 1 1/4 inch shaft. The full part number pins down the exact configuration.
These units turn up on conveyors, belts, elevators, mixers and process equipment in food, chemical and materials plants. They suit humid or dusty areas, and the 3-bolt flange mounts to metal structures or masonry with balanced stress across the fasteners.
Selection comes down to shaft diameter, load type (radial, axial or combined) and the surrounding conditions. The insert seal keeps contaminants out, so in damp settings it pays to check how well it seals. During installation, align the flange with the support surface and tighten the bolts evenly. Most insert bearings are lubricated for life, though it is wise to inspect the seal and consider relubrication based on how the unit runs.
Y-bearing insert units from different brands are often interchangeable when flange dimensions, shaft diameter and mounting type line up. Before requesting a quote, compare the critical measurements: hole spacing, shaft diameter and center height. MR Industrial Accessories LLC can point you to a compatible alternative.
To replace a Y-bearing insert unit, send the complete part number by WhatsApp or email. The team replies promptly and can suggest an equivalent if needed. We also manufacture split plummer block housings and custom special parts to fit your equipment.
Dimensions
- Número de producto
- 128150
- Bore
- 1-1/4 in
Frequently asked questions
- What does the designation F3B-SLX-104S mean?
- F stands for flange, 3B for the number of bolts, SLX for the insert series and 104 for the shaft diameter in inches. The final S indicates the sealing variant. That part number identifies the exact configuration.
- How do I know if the housing is compatible with my equipment?
- Check the shaft diameter, the hole spacing of the flange and the center height. If you have the original part number, send it by WhatsApp and we will indicate the equivalent or the best alternative.
- What maintenance does this type of housing require?
- The insert bearing usually comes lubricated for life. Periodically check the sealing and the tightening of the bolts. In dusty or humid environments, make sure no contaminant enters and consult us if relubrication is needed.