DODGE F2BSO-SCFS-25M-SHFS flange bearing 2 holes

DODGE F2BSO-SCFS-25M-SHFS belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2BSO-SCFS-25M-SHFS and any equivalents.

The DODGE SCFS series is a 2-bolt flange mounted Y-bearing that carries a rotating shaft on a flat surface, with the shaft running perpendicular to the mounting face. It suits equipment where the mounting area is tight and the bearing has to sit close to the structure. MR Industrial Accessories LLC supplies this line in different shaft sizes and sealing configurations, and quotes by part number through WhatsApp or email.

Read the code in sections. The F stands for the flange, the figure after it gives the number of mounting holes, and BSO names the housing type. The numeric block in the middle is the shaft diameter the insert is made for, the M suffix marks the sealing variant, and SHFS closes out the mounting configuration. A full reference such as F2BSO-SCFS-30M-SHFS therefore describes a 2-bolt flange housing for a 30 mm shaft with M sealing.

Typical duty includes conveyors, agitators, fans, centrifugal pumps and process lines that need front mounting in limited space. The two bolts let you line the housing up on plates and structural profiles, while the insert with its deep groove ball bearing absorbs the small misalignments that show up during installation. Food, chemical and aggregate plants, irrigation systems and agricultural machinery are common places to find them.

Match the housing to the shaft diameter and the load first: the SCFS series is intended for moderate radial load and medium speed. The M seal keeps dust and moisture out, which helps in areas with airborne particles or regular washdown. Set the flange flat and tighten the bolts evenly so the insert is not distorted. Lubrication from the factory normally covers the initial run, though in severe service it pays to check the lubricant and the shaft alignment.

Flange mounted bearings are interchangeable between manufacturers when the geometry lines up. Different brands build comparable configurations in dimensions and load capacity. For a quote, send the complete code, for example F2BSO-SCFS-25M-SHFS, together with your working conditions. MR Industrial Accessories LLC can suggest a compatible option from the brands it supplies, without changes to the mounting. Confirm shaft diameter, hole spacing and overall height before committing.

Replacing a Y-bearing with insert bearing starts with the code or model marked on the old part. Send it over on WhatsApp or by email and the team will come back promptly, and can also help if you need another sealing type or a different shaft size within the SCFS series.