DODGE F2BSO-SCFS-104S-SHFS flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCFS
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2BSO-SCFS-104S-SHFS belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2BSO-SCFS-104S-SHFS and any equivalents.
The DODGE SCFS 2-bolt flange Y-bearing unit mounts directly to a flat surface with two bolts. Its insert bearing has a spherical outer ring that sits in the housing bore, so it can handle slight misalignment during installation. Use it where the shaft runs perpendicular to the mounting face, with belt, chain or direct-coupled drives.
The SCFS code breaks down into sections: the letters tell you the housing and insert style, and the numbers in between give the bore size. In a code like F2BSO-SCFS-104S-SHFS, SCFS marks the 2-bolt flange housing family, while 104S is the shaft diameter in inches per Dodge nomenclature. Suffixes such as SHFS point to sealing and insert variants. To pick the right one, send us the full code from the nameplate or old part.
You will find these units on belt and roller conveyors, bucket elevators, mixers, exhausters, packaging lines and processing lines in food, chemical and aggregate plants. They also show up on road machinery, centrifugal pumps and industrial fans running horizontal shafts under moderate loads. The 2-bolt flange makes anchoring to sheet metal or structural profiles straightforward.
Start your selection from the shaft diameter and the mounting pattern your machine accepts. Then check the insert seal: single- or double-lip contact seals suit dusty, wet or washdown conditions. Internal clearance and lubrication come set from the manufacturer, but verify the mounting face is flat before you tighten the bolts, since a twisted flange speeds up insert wear. The inner ring locks to the shaft with set screws.
Two-bolt flange housings with insert bearings from different brands often share mounting dimensions when the series and shaft size match, though sealing, thread or housing tolerance can differ. Before swapping an assembly, compare the full code and the flange dimensions. We can point you to a compatible alternative for your application.
MR Industrial Accessories supplies the DODGE brand to customers across the United States and in several Latin American countries. If you need this housing or another SCFS variant, send the code or model from your equipment by WhatsApp or email and we will get you a quote.
Dimensions
- Número de producto
- 138940
- Bore
- 1-1/4 in
Frequently asked questions
- What does SCFS mean on a DODGE housing?
- SCFS is the family of 2-bolt flange housings with an insert bearing. The full code also carries the shaft diameter and suffixes for seal type and insert configuration. Send us the complete code so we can quote the exact replacement.
- How do I choose the right flange Y-bearing unit?
- First note the shaft diameter and the distance between flange holes. Then look at the environment: dust, water or washdowns call for a higher-protection seal. With that information we can suggest the SCFS variant that fits your equipment.
- Can I replace another brand's housing with a DODGE one?
- Often yes, provided the shaft diameter and flange mounting dimensions match. Differences usually come down to sealing or fastening thread. Send us the dimensions or the original code and we will confirm interchangeability.