DODGE F2BSO-SCFS-008L-SHFS flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCFS
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2BSO-SCFS-008L-SHFS belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2BSO-SCFS-008L-SHFS and any equivalents.
A DODGE SCFS series Y-bearing unit with insert bearing mounts through a two-bolt flange. Two bolts hold the housing flat against the machine frame, and the insert sits on a spherical outer ring that takes up slight shaft misalignment. It suits transmission shafts that need a compact, firm connection to the structure.
Read the code in blocks. The first F marks the flange version, and the 2 that follows is the number of mounting holes. BSO names the housing type, SCFS is the housing series, and L comes just before the size number. That last figure sets the shaft diameter: F2BSO-SCFS-008L-SHFS and F2BSO-SCFS-010L-SHFS differ in shaft size, while the flange layout stays the same. SHFS identifies the insert and its sealing.
Typical installations include belt and chain conveyors, bucket elevators, mixers, blowers and packaging lines, plus water treatment equipment, mills and food plants. The two-bolt flange lets you mount on folded sheet metal or profile frames. Because the unit is sealed and self-aligning, upkeep is simpler where dust, humidity or frequent washdowns are present.
Start selection with the shaft diameter and the hole spacing on the flange, then confirm the mounting face is flat and clean. The insert's spherical outer ring lets the shaft settle within the allowed clearance as you tighten the bolts. Check the sealing style for the environment, the factory lubrication and the internal clearance. During assembly, tighten gradually in a cross pattern and turn the shaft by hand to confirm it moves freely before startup.
Across brands, two-bolt flange housings interchange by shaft number and hole spacing rather than by the full code. Each maker names housings and inserts differently, so equivalence comes from matching dimensions and sealing arrangement. When the original code does not line up, look for the unit with the same shaft diameter and the same mounting pattern.
Send the code stamped on the part or shown on the drawing by WhatsApp, for example F2BSO-SCFS-008L-SHFS, along with the shaft diameter and a photo of the mounting. MR quotes the DODGE housing and, when you need another variant, points you to the compatible option.
Dimensions
- Número de producto
- 138930
- Bore
- 1/2 in
Frequently asked questions
- How do I identify the size of the SCFS housing I need?
- The number before the L in the code gives the shaft diameter, as in F2BSO-SCFS-008L-SHFS and F2BSO-SCFS-010L-SHFS. Confirm it by measuring the shaft and the distance between the two flange holes.
- What is the difference between a flange housing and a pillow block?
- A flange unit bolts onto a flat surface, usually perpendicular to the shaft, while a pillow block sits on a parallel base. The two-bolt flange takes less space and centers the load better on sheet metal and frames.
- Can I replace a housing from another brand with a DODGE one?
- Yes, by comparing shaft diameter, hole spacing and sealing type. Nomenclature differs between manufacturers, so equivalence is defined by dimensions and configuration. Send the code and dimensions by WhatsApp and we will indicate the corresponding option.