DODGE F2B-VSC-45M-NL flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- VSC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-VSC-45M-NL belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-VSC-45M-NL and any equivalents.
A DODGE VSC series Y-bearing insert set into a 2-bolt flange housing gives you a compact way to support a rotating shaft against a flat surface. You will find it on conveyors, agitators, pumps and similar power transmission equipment. MR Industrial Accessories LLC supplies this line and helps you match the right configuration to your shaft and your application.
Reading the code tells you what you are ordering. The letter F stands for the 2-bolt flange, B for the housing type, VSC for the insert series, and the digits that come after give the shaft size. A trailing M refers to how the insert locks, while NL means the bearing arrives without lubricant. Once you know these blocks, you can order a replacement without mixing up sizes or variants.
Typical sites are food, chemical, cement and material handling operations, on equipment such as belt conveyors, mixers, fans and centrifugal pumps. Two bolts are all it takes to seat the shaft on a flat surface, which keeps alignment work and replacements simple when space is tight.
Selection starts with shaft diameter and the nature of the load, whether radial, axial or a combination. The VSC insert handles static and dynamic misalignment, yet it pays to line up the flange before you tighten the bolts. Because the NL suffix means no lubricant is included, grease the bearing before start-up using the recommended type and quantity. Also look at how the insert is sealed, and add extra protection where dust or moisture is present.
DODGE mounted bearings can stand in for other brands of 2-bolt flange housings built to the same dimensional standard. When replacing an existing unit, compare shaft diameter, the spacing between the flange holes and the center height. If the code does not line up, dimensional compatibility is what counts. MR Industrial Accessories LLC can point you to the alternative that fits your application.
For a quote on a DODGE VSC series Y-bearing with insert, send the complete code by WhatsApp or email, for example F2B-VSC-25M-NL or F2B-VSC-40M-NL. With that we can quote the exact reference or a suitable equivalent, and we can also advise on other sizes in the series or on 2-bolt flange housings for your equipment. The team replies promptly.
Dimensions
- Bore
- 45 mm
Frequently asked questions
- What does the NL suffix mean on a DODGE VSC housing?
- It means the insert bearing is shipped without lubrication. Grease it before mounting, using the lubricant called for by the application. If you would rather have a pre-lubricated version, send your equipment code on WhatsApp and ask.
- How do I choose the VSC housing for my shaft?
- Take the shaft diameter, then check the distance between the flange holes and the center height. Those figures let us identify the right VSC code. If you already have a code, send it over and we will quote it.
- Are DODGE VSC housings compatible with other brands?
- In most cases, 2-bolt flange housings with interchangeable inserts work across brands when the critical dimensions agree: shaft diameter, hole spacing and center height. Ask us about the equivalence for your equipment.