DODGE F2B-VSC-104S-NL flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- VSC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-VSC-104S-NL belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-VSC-104S-NL and any equivalents.
The DODGE VSC series Y-bearing insert unit pairs an insert ball bearing with a cast iron housing in a 2-bolt flange configuration. It supports rotating shafts where a compact, removable mounting is needed, and the insert self-aligns within the flange. This makes it a practical choice for light and medium-duty transmission applications.
Reading the VSC code helps you identify the unit before you order. The letter F stands for the flange configuration, the digit after the hyphen (2 in F2B-VSC-104S-NL) gives the number of mounting holes, and B identifies the housing type. The three-digit block, such as 104, ties to the shaft diameter and insert size. The suffix S marks the insert series, while NL means the unit ships without factory lubrication so you can apply the grease that suits your operating conditions.
These units are common in food, textile, woodworking and chemical plants, where fan shafts, conveyors, mixers and pumps need stable, easily replaceable support. The 2-bolt flange mounts on sheet metal or profile structures, and the bolts are accessible from one side only, which helps in tight spaces. For selection, check shaft diameter, load type (radial, axial or combined) and the environment. The insert seal determines protection against dust and moisture; in wet or fine-particle areas, extra protection is advisable. Choose a lubricant rated for the working temperature, seat the flange without deformation, align the shaft with the insert, and tighten the bolts evenly to avoid stresses that shorten bearing life.
For equivalences, the DODGE VSC series can be interchanged with other 2-bolt flange units from makers such as SKF, NTN or Timken when mounting dimensions, shaft diameter and insert locking type match. A similar code is not enough: verify the housing drawing and hole threads. When replacing an existing unit, compare actual measurements before requesting a quote.
To request a quote, send the complete code from the nameplate or housing, for example F2B-VSC-104S-NL, or the shaft and flange hole measurements via WhatsApp or email. The team replies promptly, quotes the DODGE reference or suggests a compatible alternative, and can help you choose the right unit. If you need a variant not listed, send the model and we will respond.
Dimensions
- Número de producto
- 051888
- Bore
- 1-1/4 in
Frequently asked questions
- What does the NL suffix mean in the VSC designation?
- NL indicates the unit is supplied without factory lubrication. Apply the appropriate grease for the working temperature and load before putting it into service. This is common practice for mounted units lubricated at assembly.
- How do I choose the correct shaft diameter for a VSC housing?
- Measure the shaft end where the insert mounts. In the designation, the three-digit number is associated with that diameter. If unsure, send the measurement with a caliper and the housing code, and we will quote the corresponding unit.
- Can a VSC housing be replaced with one from another brand?
- Yes, as long as flange dimensions, hole spacing, shaft diameter and insert locking type match. A similar code is not enough. Compare drawings or actual measurements and consult us for the compatible alternative.