DODGE F2B-SXV-17M flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXV
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-SXV-17M belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SXV-17M and any equivalents.
A DODGE SXV Y-bearing flange unit mounts a rotating shaft to a flat surface using two bolts. The insert bearing sits in a compact housing that keeps alignment simple and maintenance low, which suits equipment where space is tight. MR Industrial Accessories LLC supplies this line and can match the unit to your shaft size.
Reading the code tells you what you are ordering. F stands for the 2-bolt flange pattern. The digits that follow are the shaft size in millimeters: 17, 20, 25, 30, 35, 40, 45 or 50. SXV names the series, and the closing M identifies the seal type. So F2B-SXV-30M is a flange unit built for a 30 mm shaft with M sealing. With that structure you can build the exact number for the size your line runs.
Typical duty includes belt conveyors, screens, mixers, fans and packaging lines, plus agricultural machinery and food processing plants. Bolting to sheet metal or steel frames is straightforward with the 2-bolt flange. Because the series spans 17 to 50 mm shafts, it fits a broad range of medium-sized equipment.
Selection comes down to three things: shaft diameter, the load case (radial, axial or combined) and where the unit will operate. The M seal keeps dust and moisture out, so it holds up where airborne particles are present. When mounting, check that the support face is clean and flat, then tighten the bolts evenly so the housing does not distort. Grease from the factory normally covers initial running, though in tougher conditions it pays to inspect the lubricant at intervals.
Replacing a unit from another brand hinges on flange dimensions and shaft diameter. DODGE SXV units can interchange with other 2-bolt flange insert bearings when the critical dimensions line up. Comparing drawings, or simply sending the old part number, is the reliable way to confirm. We can point you to the equivalent for your equipment.
For a quote on a DODGE Y-bearing flange unit, message us the full part number, such as F2B-SXV-35M, or send your shaft measurement and bolt-hole spacing. If the variant you need is not obvious, share the model and we will help identify it.
Dimensions
- Número de producto
- 125529
- Bore
- 17 mm
Frequently asked questions
- What does the M at the end of F2B-SXV-30M indicate?
- It identifies the seal type used on the insert bearing. In the SXV series this seal guards against dust and moisture, which suits plants where particles are in the air. Tell us if your conditions call for different protection.
- How do I pick the right shaft diameter?
- The number inside the part number is the shaft diameter in millimeters: 17, 20, 25 and so on. Measure your shaft with a caliper and select the matching unit, or send us the reading and we will confirm.
- Can these units replace bearings from other brands?
- Often yes, as long as the mounting dimensions and shaft diameter agree with other 2-bolt flange insert bearings. Compare drawings or send the original part number and we will identify the alternative.