DODGE F2B-SXR-40M-FF flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-SXR-40M-FF belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SXR-40M-FF and any equivalents.
A DODGE SXR series Y-bearing 2-bolt flange unit fastens a rotating shaft to a machine frame while handling moderate radial and axial forces. Its compact, self-aligning design simplifies mounting where space is limited. MR Industrial Accessories LLC supplies this line to plants and maintenance operations across the United States, Canada, Mexico and South America.
Reading the code helps you order correctly. In the SXR series, F stands for the flange version, 2B for the two-bolt housing, SXR for the insert series, the following digits give the shaft size in millimeters, M shows the locking method and FF the sealing. Take F2B-SXR-30M-FF: a two-bolt flange unit for a 30 mm shaft, SXR insert, M locking, FF sealing. Every part number in the series follows this pattern.
You will find these units on conveyors, mixers, fans, pumps, mills and packaging lines, among other continuously running equipment. Dust and moisture are common in food, chemical, cement and aggregate processing, so a robust unit with straightforward maintenance matters. Because the flange uses two bolts, aligning and replacing the unit is simpler and the shaft does not have to come out completely.
Selection comes down to three things: shaft diameter, the nature of the load (radial, axial or combined) and the working environment. The FF seal keeps out dust and splashes, which suits dirty or damp locations, and it appears on all part numbers in this series. When mounting, set the flange flat, line up the holes and tighten the bolts in a cross pattern. Follow the duty cycle for lubrication of the insert and verify axial clearance. Good alignment cuts vibration and helps the bearing last.
Y-bearing units from various manufacturers can often be swapped when flange dimensions, shaft diameter and locking type correspond. For a quote, look beyond the part number and compare series, sealing and locking system. MR Industrial Accessories LLC helps you locate a suitable equivalent from its power transmission and bearing housing range.
To get a quote, send the part number or your shaft dimensions on WhatsApp or by email. The team replies promptly, suggests equivalents and assists with selection.
Dimensions
- Bore
- 40 mm
Frequently asked questions
- How do I work out which part number I need?
- The number combines flange configuration, insert series, shaft diameter in millimeters and sealing type. F2B-SXR-30M-FF, for instance, fits a 30 mm shaft. If anything is unclear, send your shaft and flange dimensions on WhatsApp and we will help.
- What does the FF suffix indicate?
- FF identifies the insert sealing type, built to keep out dust and splashes. It is a frequent choice in tough industrial settings. If your application calls for different protection, ask us about the right variant.
- Can DODGE SXR units replace other brands?
- Often they can, provided flange dimensions, shaft diameter and locking system match. The part number by itself is not enough; dimensions and sealing type must also be compared. Send us your equipment details and we will advise on a suitable equivalent.