DODGE F2B-SXR-30M-NL flange bearing 2 holes

DODGE F2B-SXR-30M-NL belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SXR-30M-NL and any equivalents.

A 2-bolt flange bracket in the DODGE SXR line is a mounted unit: a cast iron housing fitted with an insert ball bearing, bolted to a flat surface through two holes. It holds rotating shafts where the mounting must stay compact and rigid, with alignment fixed by the structure itself.

Reading the code helps you pick the right unit. The letters tell you what each block of the designation covers: F is the 2-bolt flange, B the mounting type, SXR the insert bearing series, NL the sealing. The digits between the hyphens give the shaft diameter in millimeters, and the closing M confirms metric sizing, so the code states both the size and the configuration.

Typical duty covers conveyors, belts, elevators, mixers, fans and packaging lines. Food plants, cement works, mining operations and aggregate processing all rely on this type of protected mounting, since dust and moisture are always present. Because the flange uses a standardized bolt spacing, the unit can be fixed to walls or steel structures and swapped out without reworking the frame.

Selection comes down to two checks: shaft diameter and the bolt hole spacing on the flange. The NL sealing keeps lubrication in and contaminants out, so in dirty areas or where washdowns are frequent, inspect the lips and regrease according to the duty cycle. Install on a clean, flat surface and tighten the bolts evenly so the housing is not distorted; good alignment is what lets the insert bearing reach its full service life.

Units from different brands can often be exchanged when shaft diameter, hole spacing and center height line up. The safest way to request a quote is to send the complete code, for example F2B-SXR-30M-NL, along with the shaft dimensions. The team can point you to a compatible option among the brands supplied while keeping the same mounting geometry.

To replace an existing bracket or fit out new equipment, send the code or model marked on the part by WhatsApp or email. You will get a prompt quote and help choosing the right configuration for the application. Split plummer block housings and custom parts are also manufactured for projects that need them.