DODGE F2B-SL-17M flange bearing 2 holes

DODGE F2B-SL-17M belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SL-17M and any equivalents.

This 2-bolt flange Y-bearing unit arrives pre-assembled, pairing a cast iron housing with an insert ball bearing. It mounts flat on a surface and supports rotating shafts where a compact, straightforward installation with some alignment capability is needed. The DODGE SL series is aimed at general industrial duties.

Reading the part number helps you order the right unit. In codes such as F2B-SL-17M or F2B-SL-35M, the F stands for the 2-bolt flange, while the number that follows indicates the unit size and the shaft diameter it fits. The SL block is the series, and the trailing M denotes the sealing and locking variant of the insert. With that full code there is no ambiguity.

Typical installations include belt conveyors, chain elevators, mixers, screens and packaging lines, as well as water treatment equipment, feed mills and metalworking shops. The two-bolt flange mounts on folded sheet metal or profile structures, and the bolts are accessible from the front, which helps where side clearance is tight.

When selecting, consider the radial and axial loads on the shaft, the rotation speed and the working environment. The insert's sealing determines how much contamination it tolerates; in dusty or wet areas, a more closed protection is advisable. Internal clearance and lubrication are set by the manufacturer, so no regreasing is needed at mounting. Check flange alignment before tightening the bolts and avoid striking the insert when fitting it to the shaft.

For interchangeability, 2-bolt flange housings with insert bearings come from several brands under their own nomenclatures. The critical data for replacing one unit with another are the mounting dimensions: hole spacing, bolt diameter and height to center. The equivalent is found by those dimensions and the shaft diameter. MR can suggest a compatible alternative.

To get a quote for a DODGE SL series Y-bearing unit, send the complete part number by WhatsApp or email. We reply promptly. We can also advise if the unit will operate in a demanding environment or if the shaft diameter is unusual.