DODGE F2B-SCMED-50M flange bearing 2 holes

DODGE F2B-SCMED-50M belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SCMED-50M and any equivalents.

The DODGE SCMED series 2-bolt flange bearing is a mounted unit that pairs a cast iron housing with an insert ball bearing. It bolts to a flat surface with two fasteners, supporting and guiding rotating shafts where the mounting must sit flush against a wall or frame. MR Industrial Accessories supplies this line for power transmission applications.

Reading the SCMED code helps you order correctly. The letter F stands for flange housing, 2B indicates the two-bolt version, SCMED is the insert series, and the final number—25, 30, 35, 40, 45, 50, or 55—gives the shaft diameter in millimeters. The suffix M denotes the metric version. For instance, F2B-SCMED-30M is a 2-bolt flange housing for a 30 mm shaft.

You will find these units on belt conveyors, bucket elevators, mixers, blowers, centrifugal pumps, and packaging lines. They are common in food processing, cement, tanneries, water treatment, and metalworking facilities. The 2-bolt flange mounts easily on folded sheet metal or profile structures, and the insert with set screws allows simple shaft adjustment without extra machining.

When selecting a housing, confirm the shaft diameter and the mounting configuration of your machine. Check the insert seal: versions with a contact lip seal suit moderately dusty or moist environments. During installation, align the flange with the shaft centerline and tighten the insert set screws evenly. The bearing is pre-lubricated; in service, add grease according to the duty cycle. Proper alignment helps extend assembly life.

Housings from different brands can be interchangeable if flange dimensions, shaft diameter, and mounting system match. Metric series often have equivalents in other lines, but always verify mounting holes and insert type before replacing. If you need an alternative to the SCMED series, we can suggest a compatible option for your application.

To request a quote for a DODGE SCMED series housing, send the complete part number on WhatsApp—for example, F2B-SCMED-40M—or provide your shaft dimensions and the distance between flange holes. Our team will reply promptly with a suitable alternative for your equipment.