DODGE F2B-SCM-108 flange bearing 2 holes

DODGE F2B-SCM-108 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SCM-108 and any equivalents.

A 2-bolt flange Y-bearing unit pairs a cast iron housing with an insert ball bearing that arrives already aligned and greased. Two bolts hold it to a flat surface, and the shaft it carries turns inside the insert. You will find this arrangement on conveyors, agitators, blowers and other process equipment. DODGE builds the SC and SCM lines in this format, and MR Industrial Accessories supplies them to plants in the United States and Latin America.

Read the part number in blocks. The leading letter tells you the housing style, so F means a 2-bolt flange, and the digit after the hyphen gives the housing size. Next comes the family code, SC or SCM, which covers the housing and insert bearing together. The trailing number sets the shaft diameter for that particular unit.

These units suit shafts that need support in tight spaces with straightforward fastening. Typical locations include belt and chain conveyors, mixers, exhaust fans, centrifugal pumps, screens and packaging lines. Dust, humidity and washdown are common in food plants, cement plants, paper mills, meatpacking plants and aggregate operations, so the flange format with its machined support face fits folded sheet metal and profile structures well.

Start your selection from the shaft diameter and the load type. The SC and SCM series handle moderate radial load with some axial load. Look at the insert sealing for the environment; where water or fine dust is present, extra protection is worth considering. At mounting, set the flange on a flat, clean surface, tighten the bolts in a cross pattern and confirm the shaft lines up with the drive equipment. The insert is greased at the factory, so in service follow your plant's greasing plan and keep the refill hole reachable.

Flange mounted units come in several brands and equivalent lines. Interchangeability depends on the shaft diameter, the distance between the flange holes and the center height, not on the nominal size alone. Two housings of the same nominal size can differ at those points, so compare the equipment data sheet before you replace one. When the original housing is no longer available, the compatible option is found by mounting dimensions and load capacity. MR Industrial Accessories supplies DODGE and can help with that comparison.

If you have the housing part number, send it by WhatsApp or email together with the shaft diameter and a photo of the mounting. With that information the team will quote the matching DODGE unit or point you to a compatible alternative in the SC and SCM series. If your equipment calls for a variant you do not see listed, write in with the model and the team will work it out.