DODGE F2B-SCEZ-30M-P flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCEZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-SCEZ-30M-P belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SCEZ-30M-P and any equivalents.
This mounted unit pairs a cast iron flange housing with a DODGE SCEZ insert ball bearing, giving you a ready-to-bolt assembly for flat surfaces. It keeps shaft support compact and rigid in equipment where space is tight. MR Industrial Accessories supplies this line with options for a range of shaft sizes.
Reading the code helps you specify the right unit. The F stands for the 2-bolt flange pattern, B for the housing style, and SCEZ for the insert series and its sealing arrangement. The digits that follow give the shaft diameter in millimeters. The trailing M identifies how the insert locks onto the shaft, while P indicates the housing material or finish. So F2B-SCEZ-30M-P is a flange housing built for a 30 mm shaft, using an SCEZ insert and a P-finish housing.
You will find these units on belt conveyors, bucket elevators, mixers, fans and process lines in food, chemical and aggregate operations. They suit front mounting with two bolts and straightforward alignment. The cast iron housing takes radial loads and some axial thrust, and the self-aligning insert simplifies installation on shafts with normal tolerances.
When selecting, confirm the shaft diameter and the distance between the flange bolt holes. The SCEZ insert includes sealing that holds grease in and keeps dust out. In wet or dirty conditions, inspect the sealing lips and relubricate based on how hard the unit works. Mount the flange on a clean, flat surface, tighten bolts in a cross pattern, and check that the shaft turns freely. Good alignment reduces vibration and helps the bearing last.
DODGE SCEZ housings interchange with other brands that share the same 2-bolt flange standard and shaft size. For a replacement, send the full code or the flange and shaft dimensions and we will point you to a compatible option. MR Industrial Accessories also manufactures split plummer block housings and special parts for non-standard mountings.
To get a quote, message us on WhatsApp with the product code or the shaft diameter you need. We will respond promptly with the technical details so you can confirm the mounting.
Dimensions
- Bore
- 30 mm
Frequently asked questions
- What do the M and P mean in the code F2B-SCEZ-30M-P?
- The M indicates the locking method that secures the insert to the shaft, such as set screws or an eccentric collar depending on the series. The P identifies the housing finish or material. Send us the complete code on WhatsApp to confirm the exact variant.
- Can this housing replace an insert bearing from another brand?
- Yes, as long as the shaft diameter and the flange bolt hole spacing match. The SCEZ series follows an extended dimensional standard, so it is often interchangeable with other brands. Send us the dimensions or the code of the old unit and we will indicate the equivalent.
- How is the SCEZ insert bearing lubricated?
- The insert comes lubricated from the factory and has a relubrication channel. In dusty or humid environments, it is advisable to grease periodically with the equipment stopped. The frequency depends on the working conditions; ask us on WhatsApp if you need guidance.