DODGE F2B-SCEZ-008L-SH flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCEZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-SCEZ-008L-SH belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SCEZ-008L-SH and any equivalents.
A two-bolt flange mounted unit pairs a cast iron housing with a self-aligning ball bearing insert already fitted inside. Bolted to the frame, it carries the rotating shaft and absorbs the small misalignments that show up during assembly. MR Industrial Accessories supplies these DODGE SCEZ units for equipment that calls for straightforward, heavy-duty shaft support that is easy to service.
Reading the code takes a moment but removes any doubt at the counter. F2B tells you the housing is a two-bolt flange type. SCEZ points to the insert family and the way it is sealed. The three digits that follow, as in F2B-SCEZ-008L-SH or F2B-SCEZ-010L-SH, match the shaft size the unit is built for. The L marks the locking method on the shaft, and SH describes the seal arrangement.
You will find these units on conveyors, belt drives, elevators, mixers, blowers and process lines where speeds are moderate and the load runs mostly radial. Plants handling food, chemicals, cement and aggregates favor them because the insert can be swapped out with the housing still bolted in place. Pumping and ventilation equipment with hard-to-hold alignment is another common home.
Sizing comes down to three things: shaft diameter, radial load and the direction the force pushes against the flange. The self-aligning insert takes small angular deviation, but the housing still needs a flat mounting surface and evenly torqued bolts. The SH seal keeps dust and splashes out; where water or fine grit is present, inspect the sealing lips and refresh the lubricant on a schedule that matches the duty.
Across brands, two-bolt flange units interchange on shaft size, housing style and seal setup rather than on the catalog code. Center height, hole spacing and locking style can differ even at the same diameter. Replacing an existing unit? Send the full code or the housing measurements and we will point you to the matching option in the DODGE line.
Have F2B-SCEZ-008L-SH, F2B-SCEZ-010L-SH or another SCEZ reference on hand? Send it by WhatsApp or email and we will quote it. We can also help you settle on the insert, seal or housing that fits your equipment.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- What does the SH suffix mean in the SCEZ series?
- SH identifies the seal configuration of the insert. It defines how the unit is protected against dust and splashes, so keep it in the code when you order a replacement for a demanding environment.
- How do I choose the correct shaft diameter?
- The three digits in the designation, such as 008 in F2B-SCEZ-008L-SH, indicate shaft diameter. Measure the shaft at the support area with a caliper and match it to the code. If you are unsure, send us the measurement and we will identify the unit.
- Can only the insert be replaced without changing the housing?
- Yes. The insert bearing can be renewed while the flange housing stays mounted, as long as shaft diameter and locking system match. That keeps maintenance downtime short.