DODGE F2B-SC-008L flange bearing 2 holes

DODGE F2B-SC-008L belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SC-008L and any equivalents.

A DODGE SC 2-bolt flange bearing unit is a mounted assembly that bolts to a flat surface. Two mounting holes in the flange hold the bearing in place and transfer the load into the frame. This arrangement suits equipment where the shaft runs perpendicular to the mounting plane, alignment is straightforward, and maintenance access is simple.

The part number breaks down into three parts. The prefix F2B identifies a 2-bolt flange housing. SC is the insert bearing series. The trailing number gives the shaft size, and the suffix L shows how the insert locks to the shaft. Once you know the housing style, the series and the size, you can build the full number.

Typical installations include belt and roller conveyors, mixers, fans, centrifugal pumps, screens and packaging lines. Plants handling food, chemicals and aggregates often pick this style because the insert can be swapped without taking the surrounding structure apart. Water treatment equipment and agricultural machinery also use it where a flange mount fits into a tight spot.

Start selection with the shaft diameter and the load type: radial, axial or combined. Confirm the mounting surface is flat and stiff enough to avoid distortion. The SC insert arrives lubricated and sealed. In dusty, wet or washdown conditions, consider extra seals or covers. When installing, tighten the flange bolts in a cross pattern and verify shaft alignment with the rest of the machine.

Housings from different brands interchange by part number and shaft size, but center height and hole diameter can differ between series. Before replacing an assembly, compare the full part number and the flange dimensions. A compatible option can be identified by shaft size and locking style.

To request a quote on a DODGE SC series housing, send the part number from the part or drawing, for example F2B-SC-010L, plus the shaft size, through WhatsApp or email. We will quote it and point you to the right variant from the line if you need a different option. We can also help with mounting and lubrication questions.