DODGE F2B-PSEZ-108-P flange bearing 2 holes

DODGE F2B-PSEZ-108-P belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-PSEZ-108-P and any equivalents.

The DODGE PSEZ is a two-bolt flange mounted bearing unit that pairs an insert ball bearing with a flange housing. It holds a rotating shaft perpendicular to the mounting face and is used on conveyors, agitators, blowers and other process equipment where space at the front of the machine is limited and alignment needs to stay simple.

Reading the code helps you order the right unit. The F stands for the flange version, 2B gives the two-bolt housing size, and PSEZ identifies the insert-bearing family. The digits that follow show the shaft diameter the insert is bored for, and the trailing P denotes the insert seal style. Together these blocks define the complete assembly.

You will find these units in food and beverage operations, water treatment, material handling and packaging lines, as well as in industrial fans, mixers, screw conveyors and continuous process equipment. A two-bolt flange suits applications where the shaft must stay perpendicular to the mounting surface and where the unit can be taken off without removing the housing. MR supplies them for both replacement and new projects.

Selection starts with shaft diameter and load type: radial, axial or combined. Match the insert sealing to the environment, whether that means dust, moisture or washdown, and confirm the internal clearance the equipment can accept. At installation, set the flange on a flat, clean surface, tighten the two bolts in a cross pattern, and verify shaft alignment before start-up. Lubricate the insert according to the duty cycle and inspect the seals at regular intervals.

Two-bolt flange bearing units with insert bearings interchange across brands by shaft number, flange configuration and sealing type. When comparing lines, check the hole spacing, hole diameter and shaft center height, since housing dimensions can differ between manufacturers. The DODGE PSEZ series has equivalents in other brands. If you are unsure, send the full part number and we will point you to the compatible option.

For a replacement flange Y-bearing unit or a new assembly, message us on WhatsApp with the part number stamped on the component or with the shaft and flange dimensions. We quote the matching DODGE reference and, when needed, suggest a compatible alternative. Our own manufacturing covers split plummer block housings and custom parts.