DODGE F2B-GTM-108 flange bearing 2 holes

DODGE F2B-GTM-108 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-GTM-108 and any equivalents.

This 2-bolt flange bracket is a mounted unit that pairs a cast iron housing with a DODGE GTM series insert bearing. It bolts to a flat surface with two fasteners and supports a rotating shaft where space is tight and the flange takes care of alignment.

The code tells you what you are holding. The letter F marks the flange housing, the number after it gives the count of mounting holes, and B is the mounting variant. The GTM suffix points to the insert bearing series, including its sealing and shaft-locking design. At the end comes the shaft size, shown in inches or millimeters depending on the code, as in F2B-GTM-012 or F2B-GTM-100. Send the complete code when you ask for a quote.

You will see these brackets on belt conveyors, screens, mixers, fans and packaging lines, mounted on sheet metal or structural steel without machining. The cast iron housing handles dust and moderate humidity, while the insert absorbs the slight misalignment that shows up on long shafts or vibrating structures.

Two checks drive selection. First, confirm the shaft diameter and the locking method the insert uses, since some units take set screws and others an eccentric collar. Second, review the sealing: a contact lip seal suits dusty or wet areas, while a single-seal version is enough indoors in clean conditions. During mounting, set the flange on a flat surface, tighten the bolts in a cross pattern, and turn the shaft by hand to confirm it moves freely. Lubricate by duty cycle and check axial play.

Insert bearing brackets come from several brands, each with its own nomenclature, and interchange is not automatic. Shaft diameter, hole spacing, center height and insert locking type all have to match. The DODGE GTM series has counterparts in other lines, but any replacement needs those dimensions verified. Give us the original code and we will point you to a compatible option, or make it to size when the bracket is a split type.

For a bracket on a running machine, send the full code by WhatsApp or email, for example F2B-GTM-103, and the team will reply promptly with a quote. You can also ask about other sizes in the GTM series or other variants in the bearing bracket family.