DODGE F2B-GTAH-104S flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- GTAH
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-GTAH-104S belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-GTAH-104S and any equivalents.
The DODGE GTAH Y-bearing insert unit pairs a ball insert bearing with a cast housing in a two-bolt flange configuration. It supports rotating shafts where a straightforward, sturdy mounting is needed, offering self-alignment and factory lubrication. Belt drives, conveyors and agricultural equipment are among its typical uses.
Reading the GTAH code is useful when ordering or replacing a unit. The letter F denotes the flange style, the digit that follows counts the holes, and B identifies the housing. GTAH is the insert series, while the three-digit number gives the nominal shaft diameter in inches. A trailing S marks a sealing variant. So F2B-GTAH-104S is a two-bolt flange unit for a 1 1/4 inch shaft built around a GTAH insert.
In industrial plants these units turn up on belt conveyors, mixers, fans, centrifugal pumps and process lines. Agricultural equipment such as seeders, harvesters and grain elevators also relies on them, since dusty conditions call for effective sealing. The cast housing and ball insert absorb small misalignments and combined loads, which keeps mounting simple and maintenance manageable in plants that run continuously.
Selection comes down to shaft diameter, load type and the environment the unit will work in. Self-alignment in the GTAH series offsets minor mounting errors. Check that the sealing suits dust or moisture, and follow the manufacturer's lubrication specification. During mounting, seat the flange flat on the surface and tighten the bolts evenly so the housing is not distorted.
Two-bolt flange units from different brands can often be swapped when flange dimensions, shaft diameter and locking method line up. GTAH part numbers generally correspond to other two-bolt flange lines, but confirm hole dimensions and center height first. MR Industrial Accessories supplies the DODGE brand and can point you to a suitable equivalent.
To replace a Y-bearing insert unit, send the full part number by WhatsApp or email to MR Industrial Accessories. With the model, or with the shaft and flange measurements, we will quote the DODGE GTAH series unit that fits your equipment. We can also advise on mounting and lubrication to help the assembly last.
Dimensions
- Número de producto
- 136527
- Bore
- 1-1/4 in
Frequently asked questions
- What does the designation F2B-GTAH-104S mean?
- F is the two-bolt flange, 2 is the number of holes, B is the housing type, GTAH is the insert series and 104 is the shaft diameter in inches. The final S indicates a sealing variant. This part number identifies the complete unit.
- How do I choose the right unit for my application?
- Look at the shaft diameter, the type of load, the rotation speed and the environmental conditions. The GTAH series offers self-alignment and sealing for dusty or humid environments. If you are unsure, send us your equipment data and we will advise you.
- Can I replace a unit from another brand with a DODGE one?
- Yes, if the flange dimensions, shaft diameter and locking type match. Two-bolt flange mounted units are usually interchangeable between brands, but verify the hole dimensions and the center height before mounting.