DODGE F2B-DLM-111 flange bearing 2 holes

DODGE F2B-DLM-111 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-DLM-111 and any equivalents.

The DODGE DLM series Y-bearing unit combines a 2-bolt flange housing with an insert bearing, mounting rotating shafts to flat surfaces while handling radial loads and allowing self-alignment. It suits equipment where space is tight and the shaft needs to compensate for minor misalignment. MR Industrial Accessories supplies this line and can help you identify the correct reference.

The code breaks down into distinct parts. The letter F stands for the flange housing. The digit that follows, 2 in these examples, tells you how many mounting holes the flange has. The letter B means the insert is a ball bearing secured with set screws. The DLM suffix identifies the housing and insert series, while the final number — 100, 103, 107, 108, 111, 112, 115 or 200 — corresponds to a specific shaft size from the manufacturer's table. Because the shaft diameter changes between codes, an F2B-DLM-107 cannot be swapped for an F2B-DLM-111.

You will find these units on belt conveyors, bucket elevators, mixers, mills, screens and other process equipment in food, chemical and aggregate operations. They are also common in packaging lines, water treatment facilities and material handling systems where the bearing must bolt to sheet metal or structural profiles with two holes and self-align against small frame irregularities.

Selection starts with the shaft diameter and the load type — radial, axial or combined. Next, review the sealing: contact lip seals offer better protection against dust and moisture, while single lip seals suit cleaner environments. Internal clearance and insert lubrication also affect service life, so in applications with vibration or elevated temperatures, check the grease viscosity and relubrication interval. Properly aligning the flange with the shaft prevents parasitic stresses.

DODGE builds this series to standards that ensure dimensional interchangeability with other brands of 2-bolt flange mounted bearings. When replacing an existing unit, compare the shaft diameter, the distance between the mounting holes and the insert locking method. An equivalent code from another brand may fit, but confirming the mounting dimensions is always recommended. MR Industrial Accessories can help you find a compatible alternative.

To request a quote for the DODGE DLM series Y-bearing unit you need, send the complete code — for example, F2B-DLM-108 — or the shaft dimensions and hole spacing via WhatsApp or email. Our team replies promptly with the option that best fits your equipment and can also suggest an equivalent.