DODGE F2B-DLEZ-30M-SHCR flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- DLEZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-DLEZ-30M-SHCR belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-DLEZ-30M-SHCR and any equivalents.
A DODGE DLEZ mounted unit pairs a ball insert with a two-bolt flange housing, letting you support a rotating shaft on a flat surface with the shaft running perpendicular to it. This arrangement suits equipment where space around the bearing is tight and the mounting face is a plate or frame rather than a pedestal.
The reference tells you what you are holding. F stands for the two-bolt flange, B for the mounting style, DLEZ for the insert series and its sealing arrangement, and M for the housing material. The figure set between hyphens is the shaft size in millimeters, so F2B-DLEZ-20M-SHCR takes a 20 mm shaft and F2B-DLEZ-50M-SHCR takes a 50 mm shaft. SHCR at the end describes how the insert is sealed and retained. Read the code this way and you can identify a replacement without guessing.
You will find these units on belt conveyors, bucket elevators, mixers, fans and process lines in food, chemical and aggregate plants, as well as on milling equipment, screens and material handling systems. Two bolts through the flange into standard holes in sheet metal or a steel frame keep the installation simple, and the same bolt pattern makes changeouts during maintenance straightforward.
Selection starts with the shaft diameter, then moves to the load: radial, axial or a combination of the two. The SHCR seal is intended for areas where dust and moisture are present. When you mount the unit, seat the flange fully against the surface and tighten the bolts evenly so the housing does not distort. Follow the manufacturer's lubrication guidance for the insert, and verify clearance and alignment before the equipment runs.
Units in the DODGE DLEZ line can be exchanged with other two-bolt flanged ball bearing designs of matching dimensions. What decides interchangeability is the flange footprint, the shaft diameter and the way the insert is fastened. If you are replacing an existing unit, compare those dimensions first, or send the details to our team and we will check the alternative for you.
Send the part number of the housing you need by WhatsApp or email and we will prepare your quote. We can also point you to a version with a different shaft diameter or a different seal type if your application calls for it.
Dimensions
- Número de producto
- 127747
- Bore
- 30 mm
Frequently asked questions
- What does DLEZ indicate in this housing?
- DLEZ is the insert bearing series and sealing system within the DODGE mounted bearing range. The full reference also carries the flange type, the shaft diameter and a configuration suffix, as in F2B-DLEZ-20M-SHCR.
- How do I match the housing to my shaft?
- The number in the reference, such as 20, 25 or 30, is the shaft diameter in millimeters. Measure your shaft with a caliper and pick the matching unit. If anything is unclear, send us the measurement and we will confirm the reference.
- Will it hold up in a dusty or damp area?
- The DLEZ series with the SHCR suffix uses a seal that guards against contaminants such as dust and splashes. Where conditions are harsher, ask us about versions with extra seals or end covers.