DODGE F2B-DLEZ-104S-SHCR flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- DLEZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-DLEZ-104S-SHCR belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-DLEZ-104S-SHCR and any equivalents.
This DODGE DLEZ series Y-bearing flange unit is a two-bolt flange mounted bearing. The housing bolts to a wall or frame, and the self-aligning ball insert compensates for slight shaft-to-structure misalignment. It supports drive shafts where compact front fastening is needed and lateral space is limited.
The part number follows a block structure. The leading F indicates a two-bolt flange; then comes the housing size and type. The DLEZ group identifies the insert family and its sealing and shaft-locking design. The S suffix gives the shaft diameter in inches, and SHCR denotes the insert's sealing and construction details. For example, F2B-DLEZ-104S-SHCR reads as flange, housing size, DLEZ series, shaft size, and seal variant. When requesting a quote, send the full code exactly as it appears on the equipment.
Typical applications include belt and roller conveyors, packaging lines, mixers, blowers, exhausters, bucket elevators, and process lines in food, chemical, and aggregate handling. The two-bolt flange is a good fit when front mounting is preferred over a foot base and side clearance is tight.
Selection depends on shaft diameter, radial and axial loads, rotation speed, and the working environment. The SHCR seal guards against dust and splashes; in frequent washdown or high humidity, reinforce lubrication and inspect the seal lips regularly. During mounting, set the flange on a flat, clean surface, tighten the bolts evenly, and verify shaft alignment before start-up. The insert's self-alignment corrects minor deviations, not mounting errors.
Flange mounted bearings interchange between manufacturers by code and dimensions. What matters is shaft diameter, housing type, hole spacing, and locking system. The same size can use set screws, an eccentric collar, or a tapered adapter, which changes installation. We look for dimensional and functional equivalence. Send the code or a photo of the tag via WhatsApp and we will quote the housing.
For critical equipment, have the complete code and service conditions ready: load, speed, and environment. With that information we can point you to the correct DLEZ variant and sealing options. Message us on WhatsApp with the model you need and we will reply promptly.
Dimensions
- Número de producto
- 127726
- Bore
- 1-1/4 in
Frequently asked questions
- What does DLEZ mean in a DODGE housing?
- DLEZ identifies the insert bearing family within the mounted housing line. The full code combines flange configuration, housing size, insert series, shaft diameter, and sealing type. Send us the complete code to identify the exact variant.
- How do I choose between a flange housing and a foot-mounted housing?
- It depends on how you support the shaft. The two-bolt flange fastens against a wall or frame and saves lateral space; a foot-mounted housing sits on a horizontal base. If the equipment structure is already built, keep the original housing type.
- What information do I need to request a quote?
- The complete code from the equipment or housing tag, the shaft diameter, and a photo if possible. With that we can identify the DLEZ variant and quote you via WhatsApp or email, including a compatible alternative if needed.