DODGE F2B-DL-115-NL flange bearing 2 holes

DODGE F2B-DL-115-NL belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-DL-115-NL and any equivalents.

A DODGE D-Lok 2-bolt flange Y-bearing unit arrives already assembled: a cast iron housing drilled for two mounting bolts, plus a ball bearing insert held by an eccentric locking collar. It suits rotating shafts in equipment that calls for a compact front-mounted fixing and a fast fit on site.

Reading the code helps you order the right unit. F2B stands for the two-bolt flange housing, DL identifies the D-Lok locking arrangement, the number in the middle is the shaft size code, and NL means the insert is supplied without a lubrication retainer. Compare F2B-DL-014-NL, F2B-DL-015-NL and F2B-DL-100-NL: only the middle figure changes, since that is the position that tracks shaft diameter. Before you look anything up, note the shaft size and the mounting pattern your machine accepts.

Typical duties include belt conveyors, bucket elevators, mixers, blowers and packaging lines. Food processing plants, cement operations, cold storage rooms and metalworking shops rely on this style of unit when a worn bearing has to come out without reworking the surrounding structure. Front alignment against sheet metal or a cast iron face is straightforward with two bolts, and the eccentric collar lets a maintenance technician lock the insert onto the shaft by hand, no special tooling required.

Selection comes down to two checks: the shaft diameter has to match the code, and the flange needs clearance for both bolt holes. The insert seal keeps dust and moisture away from the rolling elements, so in dirty or damp areas it pays to inspect the seals periodically and refresh the grease. Set the flange in line with the shaft, then tighten the locking screw to the specified torque. Even a small amount of misalignment introduces axial load and reduces bearing service life, so verify with a straightedge or dial indicator before the machine runs.

DODGE D-Lok units can be swapped with other 2-bolt flange Y-bearing lines that use eccentric-locking inserts, provided shaft diameter, hole spacing and center height line up. When you request a quote, include the complete code and, if you have one, a photo of the failed part. That lets our team point you to a compatible equivalent or work out a made-to-measure option. Bearings, seals and lubricants for the same job are also part of what we supply.

Not sure which code matches your equipment? Send the model number, or the shaft and flange dimensions, through WhatsApp or email. We answer promptly and will recommend the alternative that fits your application.