DODGE F2B-DL-110L-NL flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- D-Lok
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-DL-110L-NL belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-DL-110L-NL and any equivalents.
This DODGE D-Lok Y-bearing comes with an insert bearing and mounts through a two-bolt flange, holding a rotating shaft to a frame while handling moderate radial and axial forces. It suits installations where space is tight and the shaft has to go in and out quickly. MR Industrial Accessories LLC supplies the line and can help match shaft size and locking style to the job.
Reading the code is straightforward once you break it into sections. The letter F stands for the flange housing, the figure after it gives the nominal shaft diameter, and B-DL marks a two-bolt flange with a D-Lok insert. A trailing L shows eccentric locking, while NL means the insert ships without pre-lubrication. So F2B-DL-110L-NL is a two-bolt flange housing sized for a 1.1/16" shaft, with D-Lok locking and no initial grease.
Typical placements include belt conveyors, packaging lines, mills, mixers and other continuous process equipment. Industrial fans, centrifugal pumps and machine tools also use them where a two-bolt flange has to bolt to sheet metal or structural steel. The D-Lok design fits shafts that need quick adjustment and come out often, and it works well when mounting room is limited.
When choosing a housing, look at shaft diameter, the load pattern (radial, axial or both) and the surrounding conditions. The insert seal keeps dust and moisture out; for washdown or fine-particle areas, confirm the seal style. D-Lok locking uses an eccentric screw that clamps the inner ring to the shaft, so align the flange and tighten to the recommended torque to avoid slipping. Pick a lubricant that matches operating temperature, and leave internal clearance free for thermal growth.
DODGE D-Lok housings can replace other two-bolt flange mounted bearings built to the same mounting standard and flange dimensions. Before requesting a quote, compare shaft diameter, flange hole spacing and locking method. MR Industrial Accessories LLC can point out a compatible option or make the housing to size when the application calls for it.
To replace a DODGE D-Lok Y-bearing with insert, send the full part number over WhatsApp to MR Industrial Accessories LLC. We respond promptly and can advise on the configuration that fits your equipment. You may also ask about other brands or sizes in the bearing housing range.
Dimensions
- Bore
- 1-5/8 in
Frequently asked questions
- What does the designation F2B-DL-110L-NL mean?
- F is the two-bolt flange, 2B the housing type, DL the D-Lok series, 110 the shaft diameter in inches (1.1/16"), L eccentric locking, and NL the absence of pre-lubrication. The code defines dimensions and configuration.
- How do I know if this housing is compatible with my equipment?
- Check the shaft diameter, the distance between flange holes and the insert locking type. If you have the original part number, send it by WhatsApp and we will indicate the equivalent or the best alternative for your application.
- What lubrication does the D-Lok insert bearing use?
- The insert takes general-purpose bearing grease. The choice depends on temperature and environment: for high heat or humidity, a specific grease is recommended. The NL suffix means it arrives without lubricant, so it must be greased before start-up.