DODGE AN-GT-09-110-D piloted flange bearing

DODGE AN-GT-09-110-D belongs to piloted flange bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AN-GT-09-110-D and any equivalents.

The AN-GT from DODGE is a piloted flange mounted unit that carries an insert bearing. The flange locates the assembly in the frame and the bolt holes anchor it to metal structures or masonry, so a rotating shaft stays supported where radial load and a certain amount of thrust are present. Alignment is straightforward and servicing is easy to reach.

Reading the code helps when you reorder. The letters at the start point to the housing family, the two digits that follow give the insert bearing size, and the closing suffix covers configuration or sealing options. A reference such as AN-GT-09-110-D therefore breaks down into the AN prefix, the GT series, size 09, code 110 and a D ending. Copying the tag on the old unit is usually enough to get the right replacement.

Typical installations include belt conveyors, mixers, blowers, centrifugal pumps, screens and packaging lines, as well as water treatment equipment and agricultural machinery. The piloted flange is what makes these units practical on folded sheet metal or profile frames, and in plants handling food, chemicals or aggregates the sealing keeps dust and moisture away from the bearing.

Before ordering, confirm the shaft diameter, the pilot diameter and the spacing between the flange holes. Look at the sealing as well: a reinforced version is the better choice where dust or water is present. During installation, seat the flange flat, tighten the bolts in a cross pattern and verify alignment against the drive shaft. Follow the lubrication interval for your duty cycle and check axial clearance before start-up.

Insert bearings and mounted housings can be interchanged between brands by shaft number and housing type, but center height, pilot and hole positions differ from one line to another. Shaft diameter on its own is not enough: compare the flange and the shaft locking method too. A photo of the part together with the main dimensions helps us identify it.

When a machine is down, send the complete part number or the machine model through WhatsApp or email. Our team replies promptly, quotes the DODGE housing and can suggest equivalents, including options from our own manufacturing, and will help you choose the right insert, sealing and lubrication for the application.