DODGE 2MA29 v-belt pulley
- Brand
- DODGE
- Category
- Power transmission
- Subcategory
- Pulleys
- Series
- 2MA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE 2MA29 belongs to v-belt pulley, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2MA29 and any equivalents.
V-belt pulleys in the Dodge 2MA line mount on shafts and carry motion to driven equipment through V-belts. Plants use them wherever speed or torque has to be set by changing sheave sizes along the same drive. MR Industrial Accessories LLC supplies this series to customers in the United States and Latin America.
Reading the code takes two steps. The leading digit tells you how many belt grooves the pulley carries; the letters MA place it in one profile family for V-belts. So a 2MA20 has two grooves, and 2MA25 or 2MA29 sit in the same family at different pitch diameters. Because the diameter is not built into the number itself, the safest way to request a quote is to send the full part number together with the shaft size you need.
Typical applications include industrial fans, centrifugal pumps, compressors, conveyor drives and machine tools. Maintenance crews reach for the 2MA range when replacing a worn pulley or changing a drive ratio on equipment that runs two belts and needs steady operation at moderate power. When ordering, confirm pitch diameter, groove count, shaft diameter and keyway type before the pulley is pulled from the shelf.
Mounting is straightforward but alignment matters. Wipe the shaft and bore clean, seat the key without play, line the pulley up with its mate and set belt tension per the equipment manual. A pulley running out of line wears belts unevenly and adds vibration, so check with a straightedge or laser before start-up.
Dodge pulleys work in place of other transmission brands when belt profile, pitch diameter, groove count and shaft diameter all line up. A similar part number is not enough on its own: the belt section and the way the pulley fastens to the shaft have to be compared as well. For a replacement, send the number stamped on the old pulley along with the shaft dimensions.
MR Industrial Accessories LLC supplies Dodge 2MA pulleys alongside other power transmission lines. If the variant you need is not shown, message us on WhatsApp or by email with the part number or model, and the team will reply promptly, suggest equivalents and help you choose.
Dimensions
- Bore
- 1-1/8 in
Frequently asked questions
- What does the 2MA code tell me about a Dodge pulley?
- The 2 means the pulley has two V-belt grooves, and MA identifies the profile family. The trailing number, as in 2MA20 or 2MA25, separates pitch diameters inside that family. Send the full part number plus the shaft size to get a quote.
- How can I tell whether a 2MA pulley will replace the one on my machine?
- Match belt profile, pitch diameter, groove count and shaft diameter with keyway. When all four agree, it will interchange. If anything is unclear, send a photo of the old pulley and the shaft measurements on WhatsApp.
- What should I verify when installing a V-belt pulley?
- Make sure the shaft and bore are clean, the key fits with no play and the pulley lines up with the drive pulley. Set belt tension as the equipment manual specifies, then check for vibration or uneven belt wear.