DBH 9983 radial shaft seal — 30 x 62 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9983 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9983 and any equivalents.
The DBH 9983 is a radial shaft seal that keeps lubricant in and contaminants out where a rotating shaft passes through a stationary housing. It measures 30 mm at the shaft, 62 mm at the housing bore and 7.00 mm in height, with an Mx lip and case design. These figures let you confirm a match before you request a quote.
This seal carries the DBH brand and the code 9983. Its data sheet lists a 30 mm shaft diameter, a 62 mm housing bore and a 7.00 mm height. The Mx design describes the lip and metal case arrangement, built for lubricated running conditions where the shaft needs a dependable seal. It is a replacement component, not a made-to-order part.
You will find radial shaft seals of this type in gearboxes, pumps, electric motors, conveyor rollers and power transmission equipment. Their job is the same in every case: hold oil or grease inside the assembly and keep out the dust, water and particles that speed up wear on bearings and gears. The 9983 size tends to appear in medium-sized equipment where radial space is tight.
Before installing, inspect the shaft for burrs or deep marks in the lip contact area and make sure the housing is clean and undistorted. Fit the seal with the lip facing the lubricant side and use a proper installation tool so the lip is not damaged. If the shaft is worn, a repair sleeve may be an option before fitting the same size.
If you need an equivalent or another size, send the 9983 code together with your measured shaft, housing bore and height. With those numbers we can search for an alternative in the same brand or in another line we carry. A photo of the old seal and the housing also helps when the part has no readable identification.
MR Industrial Accessories LLC supplies the DBH brand. Send the 9983 code by WhatsApp or email and our team will reply promptly with a quote. If you are unsure about the size, contact us anyway: we can suggest equivalents and help you choose the right replacement.
Dimensions
- Shaft (d)
- 30mm
- Housing bore (D)
- 62mm
- Height (h)
- 7.00mm
- Design
- Mx
Frequently asked questions
- What are the dimensions of the DBH 9983 oil seal?
- The data sheet gives a 30 mm shaft diameter, a 62 mm housing bore and a 7.00 mm height. Compare these with your equipment before requesting a quote.
- How do I check if this seal replaces the one installed?
- Measure the shaft, housing bore and height of the old seal. If they read 30, 62 and 7.00 mm, the 9983 is a direct candidate. If not, send us your dimensions and we will look for an alternative.
- Can I ask for an equivalent?
- Yes. Write to us on WhatsApp or by email with the 9983 code and your equipment dimensions. We will review options in the same brand or in other lines we carry to find a suitable replacement.