DBH 9928 radial shaft seal — 32 x 45 x 16

DBH 9928 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9928 and any equivalents.

The DBH 9928 is a radial shaft seal that keeps lubricant in and contaminants out where a shaft turns inside a housing. It seats in the bore with an interference fit, and its lip runs against the shaft on a thin film of oil. Because it is a wear part, it is replaced when grease starts escaping or grit gets past the lip. MR Industrial Accessories supplies this brand and can help you confirm the size.

The DBH 9928 carries these measurements: shaft 32 mm, housing 45 mm, height 16.00 mm. Its design is A 053, which describes the lip profile and metal body. Those three values are what you check against the old seal before fitting. The seal holds in the housing by interference while the lip rides on the shaft. A scored shaft or a bore with burrs will keep it from sealing even when the size is right.

You will find this seal in gearboxes, pumps, electric motors, rollers and transmission units where a shaft passes through an oil-filled case. It also works in dusty or wet areas, where it holds lubricant in and keeps water and grit out. In continuous process lines, a leak can force a shutdown, so it pays to inspect the lip and shaft at each preventive maintenance interval.

To select a replacement, match the shaft diameter, housing diameter and height to the DBH 9928. The A 053 design sets the lip shape and body type; if the original part has a different geometry, check with us before substituting. At installation, coat the lip with the same oil used in the equipment, keep the seal square to the shaft, and press on the outer edge with a tube or driver, never on the lip. If the shaft is worn, a repair sleeve or another size may be the better route.

To request a quote for code 9928, send the dimensions of the old seal: shaft, housing and height. We will look for the equivalent in DBH or another brand we carry. We can also help if a different lip geometry needs to be considered. The more complete the details, the faster we can give you a useful answer.

Send code 9928 or the dimensions 32 x 45 x 16 mm on WhatsApp for a quote. MR Industrial Accessories supplies this brand and works with bearings, power transmission and seals. If the seal sits inside an assembly, tell us the equipment it serves and we will help you check whether the bearing or bushing nearby also needs attention.