DBH 9782 radial shaft seal — 12 x 24 x 6

DBH 9782 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9782 and any equivalents.

A lip seal of the DBH line, reference 9782, sits between a turning shaft and a fixed housing. It keeps lubricant where it belongs and keeps dust, water and other particles out. The 12 mm shaft, 24 mm housing and 6 mm height make it a good fit for power transmission components, pumps, electric motors and small to medium gearboxes. Its Lx design pairs a sealing lip with a metal body that presses into the housing.

The reference 9782 identifies a DBH radial shaft seal. Read the size code as shaft 12.00 mm (d), housing 24.00 mm (D) and height 6.00 mm (h). In the Lx design you get one sealing lip on a metal case, made for rotating shafts running on grease or oil. MR Industrial Accessories supplies this line as a brand, and the seal works as a standard replacement item.

Seals in this size range turn up in small gearboxes, low-power electric motors, centrifugal pumps, compressors, fans, and belt- or chain-driven transmission equipment. Machine tools, packaging machinery and conveyor systems also use them wherever bearings and bushings need protection from outside contamination. The job is always the same: keep the lubricated side separate from the surrounding environment.

Before installing, confirm the shaft falls within the tolerance recommended for radial shaft seals and has no burrs or machining marks. The housing needs the right diameter and depth so the seal seats under pressure without distorting. Put lubricant on the lip first, then drive the seal in with an installation tube that bears on the metal edge rather than the lip, and keep it straight instead of hitting it from the side. On a worn shaft, a seal whose lip sits in a different position is worth considering.

Looking for an equivalent? Send code 9782 along with the shaft, housing and height measurements taken from the equipment. A photo of the old seal or the assembly drawing helps too. We then check the DBH line and compatible options and confirm which one fits without reworking the housing. Where there is room, a different height or a design with an auxiliary lip can be reviewed.

To get a quote on the DBH 9782 radial shaft seal or a possible equivalent, message us on WhatsApp with the code and dimensions. MR Industrial Accessories handles seals and radial shaft seals for industrial maintenance and can point you to the option that suits your equipment. Final selection still depends on the condition of the shaft and housing and on the operating conditions.