DBH 9765 radial shaft seal — 92.1 x 123.85 x 21
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9765 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9765 and any equivalents.
Part 9765 from DBH is a radial shaft seal, the kind of lip seal pressed into a housing bore so it wipes against a turning shaft. It holds lubricant inside the assembly and keeps dust, water and debris out of the bearing cavity. The size is fixed: 92.10 mm at the shaft, 123.85 mm at the housing and 21.00 mm in height, with a Kx lip design. Because those figures belong to one specific bore, take the time to check the cavity before you pull the old seal.
The three numbers on this seal describe where it sits, not how big the machine is. Shaft diameter 92.10 mm, housing bore 123.85 mm, height 21.00 mm. The Kx designation covers how the lip is shaped and how the seal seats in the cavity, which affects the direction it is meant to hold pressure. There is no generic series behind the 9765 number, so all three measurements have to line up with the original assembly.
You will find seals like this on gearboxes, pumps, electric motors and transmission shafts, and on any equipment where bearings run on oil or grease. The job is straightforward: keep the lubricant where it belongs and keep contaminants out. In plants with dust, washdown water or chips, a seal that is still doing its job is what protects the bearings and keeps unplanned downtime off the schedule.
When you order a replacement, measure the old part at all three points and look closely at the shaft surface. A groove or scratch on the running track will take out a new seal even when the size is right. The Kx lip has to suit the cavity type and the side the pressure comes from, and any shoulder or burr on the shaft should be dealt with before the new seal goes in.
To quote 9765, send us the caliper readings for shaft, housing and height along with a photo of the seal. With that in hand we can check for an equivalent in DBH or in another seal line we supply, or point you to the nearest standard size. We can also help you settle on the right lip design for the equipment.
Quotes go through WhatsApp or email with the part number and quantity, and our team replies promptly. If you are weighing this size against an alternative, send the assembly details and we will help you choose.
Dimensions
- Shaft (d)
- 92.1mm
- Housing bore (D)
- 123.85mm
- Height (h)
- 21.00mm
- Design
- Kx
Frequently asked questions
- What are the dimensions of the DBH 9765 oil seal?
- Shaft 92.10 mm, housing 123.85 mm, height 21.00 mm. Check all three against the cavity and shaft before mounting. If one does not match, do not force the part; ask us about an equivalent size.
- How do I know if the Kx design is correct for my equipment?
- The Kx designation describes the lip shape and how it seats. Compare it with the old seal and the cavity type: a straight housing with pressure from one side usually points to this design. Send a photo and the measurements on WhatsApp if you are unsure.
- Can I replace the 9765 with a seal from another brand?
- Yes, provided the shaft, housing and height dimensions match and the lip design is compatible. We supply several seal brands and can look for the equivalent. Send the part number and your caliper readings to verify it.