DBH 9732/85 radial shaft seal — 25 x 36 x 5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9732/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9732/85 and any equivalents.
The DBH 9732/85 oil seal is a single-lip radial shaft seal. It measures 25 mm at the shaft, 36 mm at the housing, and 5.00 mm in height. Design A 273 indicates a single sealing lip with a spring, built for rotating shafts that run with lubrication. The seal keeps oil or grease inside the housing and blocks dust, water, and particles that can harm bearings and gears. As a wear part, it should be replaced when leaks or unusual vibration appear.
This seal is press-fitted into a 36 mm housing and rides on a 25 mm shaft. Its 5.00 mm height keeps the profile compact. The A 273 design uses one lip with a spring for consistent contact on rotating shafts. DBH is a brand we supply, so you can ask about this exact size or a comparable option.
Typical installations include gearboxes, pumps, electric motors, transmission shafts, and process equipment where lubricant must stay contained. It also suits moderate dust or splash exposure. You will find it in machine tools, conveyors, and food industry equipment when the lip material matches the fluid and the operating temperature.
Selection starts with the shaft: check that its diameter falls within the recommended tolerance and that the contact surface has suitable roughness. The housing should be clean, free of burrs, and chamfered to ease insertion. Lubricate the lip before pressing it in, and avoid impacts during installation. If the shaft shows wear, a seal with an auxiliary lip may be a better fit.
We can source an equivalent from another brand within the same series. Send part number 9732/85 along with the shaft, housing, and height dimensions, plus a photo of the part. We can also advise on lip material and spring type based on the fluid and operating temperature.
To request a quote for the DBH 9732/85 oil seal or ask about an alternative, send the part number by WhatsApp or email. We reply with technical information and a quote for the size. If you need several units or an urgent replacement, note that in your message so we can guide the search.
Dimensions
- Shaft (d)
- 25mm
- Housing bore (D)
- 36mm
- Height (h)
- 5.00mm
- Design
- A 273
Frequently asked questions
- What are the dimensions of the DBH 9732/85 oil seal?
- Shaft 25 mm, housing 36 mm, height 5.00 mm. It is a single-lip radial oil seal, design A 273, as listed in the manufacturer's data sheet.
- Where is this oil seal used?
- It fits rotating shafts in gearboxes, pumps, motors, and similar equipment. Its job is to retain lubricant and exclude contaminants. Always confirm that the lip material is compatible with the fluid and the working temperature.
- How do I request a quote or an equivalent?
- Contact us by WhatsApp or email with part number 9732/85 and the dimensions. For an equivalent, also include the fluid, temperature, and a photo of the part. We reply with options and a quote.