DBH 9676Vit radial shaft seal — 46 x 59 x 7

DBH 9676Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9676Vit and any equivalents.

The DBH 9676Vit is a radial shaft seal designed to retain lubricant and block contaminants on rotating shafts. It measures 46.00 mm shaft, 59.00 mm housing and 7.00 mm height, with an A 156-R design. This seal is commonly found in gearboxes, pumps, electric motors and power transmission equipment.

The DBH 9676Vit belongs to the DBH line of radial shaft seals. Its key dimensions are: shaft 46.00 mm, housing 59.00 mm, height 7.00 mm, and design A 156-R. The A 156-R designation indicates a single-lip geometry with a spring, intended for rotating shafts that operate with continuous lubrication.

Typical uses for this seal size include gearboxes, centrifugal pumps, electric motors, conveyor rollers, and belt or chain drive systems. In each case, it prevents oil or grease from escaping and keeps dust, water or particles out of the bearing or bushing. It can also serve as a secondary barrier in assemblies that already have a primary seal.

When installing, make sure the shaft is free of burrs or wear in the contact area and that the housing is clean and undistorted. Lubricate the lip with the same oil or grease used in the equipment, then press the seal in with a flat driver to avoid twisting. Selection depends on rotation speed, operating temperature and fluid type; confirm these if they are not specified.

To request a quote, send the code 9676Vit along with the shaft, housing and height dimensions you have. A photo of the old seal and the seat also helps. We can search the DBH line or suggest a compatible alternative. If space permits, a different height or an additional lip design can be evaluated, always confirming against a sample or drawing.